💪 Powerful Wayne SWS75 Shallow Well Jet Pump - 3/4 HP for Optimal Performance - Enhanced with 56914-WYN2 Technology - Sleek Black Design Review

It was a replacement for a dead pump. It perfectly matches the space, plumbing and electrical placement. It slipped right in and responded to the electrical connections, but couldn't withstand the pressure of the water. He bought a new tank to upgrade all our investments. We had to use external technical assistance to charge the water pressure. Once that was decided everything started to work and keep pushing. Simple fix but only if you have the knowledge to fix the problem. I CAN NOW WATER IN…

We have been using the pump for a year with no problems. Yesterday, during a storm, sand and gravel blocked the water intake grate, stopping water flow. The pump runs continuously for 15 hours without water being supplied to the pump. Motor and pump have warmed up to approx. 150 degrees. After stopping the water supply, I was surprised to find that the pump was not damaged. I was concerned about a pump failure so I originally bought two pumps to have a spare. Now I think I can place the second…

I got this pump to replace an old one that died. This device is really good: smaller, lighter and much quieter than the previous one and was easy to assemble (after some minor modifications to the installation to adjust the dimensions and accommodate this device). The only issue I found is the switch to switch from 120VAC (as factory installed) to 220VAC. It's operated by a flimsy arrow-shaped plastic handle that bends and warps very easily, and it takes me about 20 minutes to finally get it to

The pump arrived with a badly damaged box, but the nearly bulletproof inner packaging allowed the pump to survive unscratched. After removing the pressure switch cover I found that the cable from the motor was not connected to the pressure switch and the cable was not tightened, it's ok it's just a bit strange but that's why it's not 5 stars. The repair took 5 seconds. The pump looks very well built and the process of switching between 120v and 220v is the easiest I've seen. The factory setting

Okay, I'll give 3 stars for now. I bought 2 of these. One works fine after 2 years, the new one failed after less than 1 year (18 December). The good news is that they come with a 3 year guarantee. However, after looking at the failed motor (symptoms: plugged in, it hums but won't turn), I searched for obvious and easily fixable problems and found that the starting capacitor was overheating and melted "stuff" out of it had come out. A replacement cap costs $10-$15 and is a lot cheaper than…

I bought this 1/2 Horse Wayne Shallow Well Pump to pump reverse osmosis water from a surface storage tank with a volume of to pump 65 gallons. I am impressed with both the smooth operation of this pump and the GPM pressure it puts out. One thing I learned is that while a typical diaphragm tank installation configuration has counter flow in a 3/4 line between the pump and the pressure tank. , usually installed at the inlet of the tank T. a pressure switch MUST (in this configuration) be placed…

I ordered this pump in September 2016 and although it worked great for a year the seal or pump housing failed two years in a row. Here's what I sent to Wayne Pumps Customer Service: On September 13, 2016, I purchased a Wanye Pumps SW50 1/2 HP jet pump through Revain.com. A year later, the seal between the pump and motor failed. Wayne Pumps honored their warranty by sending me another SW50 pump. The seal also failed on this pump. I can't understand what's going on here. I have had this farm for…