Aqua Plumb 1828010 AB1953 REQST Review

In general the quality of the mixer is poor. Center spout with very thin walls. It's also very free. This is not a problem. The seat of the connector that houses the brass adapter. As you can see, the old one, although faded, is smooth. The aqua solder is very rough and looks like it has been struck and is already faded and rusted. As a result, the connection is never secure. Look for an alternative as you can see that the seller named h2brands does not offer honor guarantee support.

Used to replace an old faucet that was leaking. Installation went well, using the same inlet pipe threading as my old unit. Delta style pens and cartridges are a plus if the faucet seals eventually fail as they are easily accessible and fairly easy to replace. The supplied top inlets on this unit are O-rings as opposed to the more conventional metal-to-metal compression types. So you'll need to use both halves of the included connectors to get a good seal. Overall very happy with this product…

This is a SOLID brass faucet. I replaced an old brass faucet on my concrete laundry tub. The old one had staves that had decayed and I couldn't find any suitable staves to replace them. So I decided to just replace the faucet. This faucet has a hard surface. You may need to do a bit of soldering to connect it. But it is very nice. Good quality. I am very happy with it. The only issue I have is that the old faucet used feet, but this one uses screws to attach it to the sink. I had to make some…

I bought this faucet to replace an old faucet (see photo). It was the perfect replacement. All I had to do was remove the old faucet, clean the threads and install this new faucet. I also had to buy a mounting block (see link below and photos) and HDPE sheeting (see link below and photos) to get under the block. I attached the unit to the sink through the holes in HDPE, from under the sink through the plumbing holes. I attached the faucet to the block with a hex head screw (included) on the…