BIGTREETECH 🏭 Additive Manufacturing Products
13 Review
1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work modes,they are UART serial port screen mode and 12864 screen mode. 2.Serial port screen mode supports two printing modes: SD card and U disk. 3.Reserve WIFI port, and WIFI function is realized by external WIFI…
Read more about this product13 Review
【Main Control Chip】Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6;. 【Three CNC Fan】Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working;. 【Increased Heat Sink】Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly…
Read more about this product7 Review
✨Why use EZ Drivers? Because 40% of users have damaged the driver due to the wrong installation. It will damage the control board or even more damage. Using EZ Drivers can improve the experience of more users. ✨SKR 3 EZ 3D Control Board adopts two kinds of driver sockets, which are compatible with both BIGTREETECH EZ series driver modules and TMC series…
Read more about this product2 Review
Ultra-Silent Stepsticks: Featured with StealthChop2, BIGTREETECH TMC2209 is ultra-silent two-phase stepper motor driver, with continuous drive current of 2A, peak current of 2.8A, and output capacity ranges from 5.5V to 28 V. It can operate bipolar stepper motors from 1 to 1/256 step modes. Low Heat-up: When StallGuard brings capability of sensorless…
Read more about this product2 Review
👑No Clogging & No Bubbles & Easy to Use: The use of non-clogging patented design and manufacturing ensures that the use of our PLA refills provides a smooth and stable printing experience, so that the printed parts have an excellent surface finish. 👑Dimensional Accuracy & Consistency: Advanced CCD diameter measurement and adaptive control system in…
Read more about this product0 Review
⭐TMC5160 Pro stepper motor driver adopts high-power control chip and externally expands power MOS tube, which can support larger current, and the maximum current can reach 8A (because the module is limited by the heating area, the current cannot exceed 5A), and low heat generation when working . ⭐Ultra-silent Mode: Supports Trinamics' unique…
Read more about this product0 Review
⭐The same BTB header as the Raspberry-Pi CM4; CB1 combined with Pi4B, the performance is almost close to the Raspberry-Pi 3B, and can be an alternative to the Raspberry-Pi 3B. ⭐BIGTREETECH CB1 is equipped with quad core 64 bit ARM Cortex-A53 @ 1.5GHz processor, 1GB DDR3 memory chip, with powerful performance. ⭐The core board reserves HDMI2.0A display…
Read more about this product0 Review
✨Using 32-bit ARM Cortex-M7 series STM32H743VIT6 main control chip with a main frequency of 480MHz, the performance is greatly improved. Supports use of Marlin & Klipper firmware. ✨The power supply chip adopts TPS5450-5A, which supports DC12/24V power input; the output current of the chip is up to 5A, and the peak value is up to 6A, which perfectly…
Read more about this product0 Review
【Ultra-quiet Movements】: TMC2208 is an extremely quiet motor driver for two-phase stepper motors.The continuous drive current is 1.2A and the peak current is 2A, voltage range 4.75V-36V, 256 subdivisions.Stealthchop ensures the motor's noiseless movements. 【Smooth Operation】:Incorporated the Spreadcycle technology, BIGTREETECH TMC2208 is controlled by…
Read more about this product0 Review
✨Using Raspberry Pi ARM Cortex-M0+ main control RP2040 microprocessor. This controller board onboard UART mode of TMC2209 and supports Klipper firmware. ✨BIGTREETECH SKR Pico V1.0 main control board heat sink design is newly upgraded, the heat dissipation area is enlarged, and the heat dissipation performance is greatly improved, which is both beautiful…
Read more about this product0 Review
👑No Clogging & No Bubbles & Easy to Use: The use of non-clogging patented design and manufacturing ensures that the use of our PLA refills provides a smooth and stable printing experience, so that the printed parts have an excellent surface finish. 👑Dimensional Accuracy & Consistency: Advanced CCD diameter measurement and adaptive control system in…
Read more about this product0 Review
⚡【High Precision】 The accuracy difference of the table is very small, about 0.005mm.The 3D printer automatically detects the surface of the bed, and automatically adjusts the perfect distance. ⚡【Wide Application】 It's suitable for 32-bit V4.2.2 Creality/Ender 3 /Ender 3 V2/Ender 3 MAX/Ender 3 Pro/Ender 3S/Ender 5/Ender 5 Pro/CR-10. ⚡【Smart Functions 】…
Read more about this product0 Review
✅No Clogging & No Bubbles & Easy to Use: Featured with non-clogging patent, BIGTREETECH PLA filament is designed and manufacturing to ensure that the use of our PLA refills provides a smooth and stable printing experience, so that the printing works have an excellent surface finishing. ✅Dimensional Accuracy & Consistency: Advanced CCD diameter…
Read more about this product0 Review
💖Suitable for Ender3/ Ender 3 Pro/ Ender5/ BIQU B1 3D Printer Original Removable PEI Steel Sheet Heated Bed. 💖Heated bed Platform: Easy to Use and Flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take. 💖Magnetic Sticker:The build surface has an upper magnetic build surface and a lower magnetic…
Read more about this product0 Review
🔻 The interface cable support SKR Mini E3 V3.0&V2.0 control board, perfectly adapt to Ender-3 V2 screen. 🔻 The single-line marking indicates the direction in which the plug is inserted into the Ender-3 V2 screen socket, please keep it the same direction as the notch of the socket. 🔻 The dual-line marking indicates the direction in the which the plug is…
Read more about this product0 Review
【Main Control Chip】Adopt STMicroelectronics' latest G0 series main control chip STM32G0B1RET6 or STM32G0B0RET6;. 【Three CNC Fan】Increase the heat dissipation controllable fan to reduce the printer temperature when the device is working;. 【Increased Heat Sink】Redesign the drive heat sink, strengthen the drive heat dissipation capacity, and greatly…
Read more about this product0 Review
1. Uniform Speed: High precision of the inner hole, stable and precise speed in the working process without losing step. 2. Stable Structure: The surface is coated with imported epoxy resin from the motor rotor, the rotor is sealed as a whole, and cured at high temperature. The rotor is not easy to process waste such as iron pins after processing the…
Read more about this product0 Review
【Main Control Chip】Uses a 32-bit ARM Cortex-M4 series STM32F446ZET6 main control chip with a core frequency of 180MHz. 【Strong DIY Support】This motherboard supports up to 8 stepper drivers with 9 stepper driver outputs in total; And up to 6 PWM fans and 2 always-on fans with the ability to individually select the voltage rail that will drive each fan…
Read more about this product0 Review
⭐BIGTREETECH Manta M8P Control Board uses 32-bit ARM Cortex-M0+ series STM32G0B1VET6 main control chip with a core frequency of 64MHz. High-performance MOSFETs are used to reduce heat generation;. ⭐The power chip of Manta M8P integrated main control board adopts TPS5450-5A, which supports DC12/24V power input; the output current of this chip is up to 5A…
Read more about this product