🏭 Additive Manufacturing Products

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

Truly flexible (no fill or layer manipulation required to achieve performance). Item Package Dimension: 8.0" L x 9.0" W x 2.5" H. Item Package Weight: 1.25 lb. Model Number: 3DNF04117505.

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

Calibrated on Formlabs’ Form2 and Form3. Preform Material Selection: Grey V4. Formlabs LT VAT is required for Form2. Print Layer Thickness: 100, 50, 25 microns. Tensile Strength (65-85 MPa) / Elongation (1-2%).

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

.

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

PLA Plastic (Polylactic Acid) - a eco-friendly polymer which is harder than ABS, and melts at a lower temperature. Amount: 1kg (2.2lbs) of Filament Per Spool. Filament Diameter: 1.75mm (Dimensional Accuracy +/- 0.03mm). Recommended Nozzle Temperature: 190 - 240C - Depending on type of 3D printer, printing speed, and ambient conditions. Compatibility…

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

2.1 lb of 3mm Nylon 3D printer filament | Similar to Taulman Bridge Nylon. Filament diameter is 2.85mm +/-0.05mm, ovality (roundness) is within 4% and weight is 2.1lb +/- 0.1. Printing Temperature range is 245 - 260C | Bed Temperature 40C - 70C. Made in the USA under strict quality standards. Compatible with the following 3D printers (with heated beds)…

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

Prints at speeds greater than 60 mm/s with standard ABS settings. Item Package Dimension: 8.0" L x 9.0" W x 2.5" H. Item Package Weight: 2.25 lb. Model Number: 3DCH02129010.

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

【Water Soluble PVA】Water-soluble Polymer. Excellent Water Solubility. Easy to Peel off, Will not Damage Printed Surface. Good Bonding to Various Material Such as PLA. Environmental-friendly and Non-toxic. Ideal for Complex Prints!. 【Stable Dimensional Tolerance】Minimum tolerance and low warping to ensure consistent feeding and stable prints, no clogging…

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

Works with profiles for nGen, Inova-1800, and other PETg filaments. Shiny and High Strength without being brittle. Low warping, splitting, curling, emissions, and fumes. High dimensional accuracy- one of the best filaments for correctly sized prints. This is the American made filament you want when your time and print quality matter most. "FOR serious…

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

Works with profiles for nGen, Inova-1800, and other PETg filaments. Shiny and High Strength without being brittle. Low warping, splitting, curling, emissions, and fumes. High dimensional accuracy- one of the best filaments for correctly sized prints. This is the American made filament you want when your time and print quality matter most. "FOR serious…

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

Safety Guarantee: Environmentally friendly, non-toxic, no peculiar smell, safe and reliable, 100% pure pla, completely biodegradable. We just make a high quality material for you. High Performance: Brand new materials, no impurities, high purity, 100% zero bubbles, no warpage, not easy to block materials, not easy to wind, it can print large-size models…

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

This filament has strong toughness and uniform in color. PLA PLUS is more resilient and smooth than PLA whether you are a novice have a pleasant printing experience. Feed smootyly and constantly without colgging the nozze or extruder.

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

【GLOW PLA FILAMENT】Contains 30% luminous powders that glow in the dark after absorbing light energy. Exposure to the strong sunlight or UV light for only 1 minutes will get an amazing glow effect, but too long exposure time may damage the glow filament. Glow green pla filament has the best luminous effect. 【DIMENSIONAL ACCURACY】1.75mm diameter,1kg pla…

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printer Parts & Accessories

[Contains] 3pcs PFA (nFEP) film. [Large Size] With its large A4 size (210 X 297 mm), Phrozen PFA (nFEP) film can be used twice for Sonic Mini, Sonic Mini 4K, and Sonic 4K. [Stronger Material] Phrozen PFA (nFEP) film is made of stronger material so that it can withstand adhesion force from the build plate, reduce resin turbulence and create more accurate…

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printer Parts & Accessories

The UV LED lamp uses 20 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual. Cold light source, low heat generation, no damage to the surface of the illuminated object, suitable for curing of film and liquid crystal surface, the resin can cure in 10-15 seconds from a…

2 Review

Industrial and Scientific, 🏭 Additive Manufacturing Products, 🖨️ 3D Printers

The Creality CR-200B 3D printer is a truly smart device with an elegant design. Low power consumption and low noise, combined with high performance and smart features, make the CR-200B the best modern desktop 3D printer. Thanks to the closed chamber and high temperature nozzle, the printer is excellent for printing with thermoplastics. The Creality…

2 Review

Industrial and Scientific, 🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

Creality UW-01 is a 2 in 1 device that includes a UV curing chamber and a handy basket to clean the resin residue from the 3D model. Features of the UW-01 model: Multifunctionality: the device supports the cleaning function and the function of after-curing models; Larger basket (190 * 154 * 200 mm): the large basket size can accommodate larger models…

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printers

Ultra Silent: Upgrade Silent drivers mainboard, which has stronger anti-interference, more stable,faster and safer. Always ensures smooth movement under 50dB, Enjoy silent printing and low decibel operation. Full Protection: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy…

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

【Soft & Flexible Filament】 JAYO TPU flexible filament (thermoplastic polyurethane) shore hardness is 95A, specifically engineered to work on most FDM 3D printers. Easy to obtain prints with excellent tensile strength and flexibility. 【1.75MM Diameter ±0.02mm】 Advanced CCD diameter measuring and self-adaptive control system in the manufacturing process…

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printer Parts & Accessories

Material: Plate is made of high quality cold rolled sheet material. Function: A direct drive kit with dual gear extruder improves extrusion and retraction. Filament: More material options,easy to print TPU flexible filament. Widely Used: for Ender3 CR10 3D printer Upgrade Direct drive dual gear extruder, Tips: Not Suit for Ender3 V2 and Ender 5. Package…

2 Review

🏭 Additive Manufacturing Products, 🖨️ 3D Printing Supplies

.