π₯οΈ Desktop Barebones
4 Review
KY-004 3pin Button Key Switch Sensor Module. Rating: 50mA 12VDC. Contact Resistance : 50m Ohm max (initial) ; Insulation Resistance: 100M Ohm(minDC 250V). Dielectric Strength : AC250V(50/60Hz for 1minute); Electrically Life:100,000cycles. Package Include :3 Pack Module.
4 Review
Protect Your Screen - The NeeGo Raspberry Pi touchscreen display case for Raspberry Pi 4 is designed to house your Raspberry Pi 4 board and the official Raspberry Pi 7-inch LCD touch screen to provide protection to the board and the display. On/Off Power Button - Its not just another screen case. The NeeGo Pi 4 Screen case has a ON/OFF Power button onβ¦
Read more about this product
4 Review
This kit with tutorial user manual containing more than 10 lessons,code,Libraries,Installation method and so on. LAFVIN Smart Robot Car 2WD Chassis Kit is simple and very easy to install. You will learn obstacle avoidance, IR remote control. This kit includes R3 Board HC-SR04 Ultrasonic Sensor,V5.0 extension board,Line tracking module etc. It is anβ¦
Read more about this product
4 Review
4 Channel AC Light Dimmer Module Controller Board ARDUINO RASPBERRY Compatible 50/60Hz 3.3V/5V logic 220V/110V. Application Areas: Control AC/DC AC motor, AC electric pump, AC tools, AC FAN. Compatible with any ARDUINO, RASPBERRY boards. Arduino, STM, ARM, AVR, Raspberry. AC Phase Control Circuit (Dimming Circuit) / Home Automation, School Projectsβ¦
Read more about this product
4 Review
LimeNET Micro makes deploying wireless networks more accessible than ever before, by extending the LimeNET line of integrated hardware solutions via an ultra-low cost platform that is capable of supporting narrowband systems, such as GSM and IoT wireless standards, in a stand-alone configuration. As with existing integrated LimeNET platforms, the newβ¦
Read more about this product
4 Review
This is a 7" HDMI display with capacitive touchscreen. It comes with a 7" LCD screen with capacitive touch panel overlay on it. The touch panel supports up to 5 touch points. And it adopts DFRobot USB free-driver technology, no special requirement of drivers. You can use it as easy as keyboard or mouse. It can be directly plugged to PC for touchingβ¦
Read more about this product
3 Review
Tiny USB to I2C interface, 100% compatible with the popular I2CDriver. I2C master, passive monitor and capture-to-PC supported at 400 kHz. Two I2C ports: one .1" 4-pin header; one Qwiic port. Supplied with 100mm color-coded Qwiic hookup jumper set. Flexible control: GUI, command-line, C/C++, and Python 2/3 host software provided for Windows, Mac, andβ¦
Read more about this product
3 Review
γSmart Pet ToyγCat Toy Automatic Kit is designed to train the cat's catching instincts. The 360-degree multi-track rotating can help you to free his hands and accompany the cat to play when the parent is out. γDIY ProjectγUsing WayinTop R3 Board as the main control board, and use two SG90 servos to control the movement of the . Great for DIY electronicsβ¦
Read more about this product
3 Review
The Vilros Raspberry Pi 4 Ultimate Project Kit includes a treasure trove of accessories for any kind Raspberry Pi Project you can think of. Includes the Raspberry Pi 4 Model B with 2GB RAM. Includes 2 Cases for all all kids of use. Includes a keyboard with touch-pad and game controllers. All parts fully covered by the Vilros 1 year warranty.
3 Review
Support Axis: Support for 4-axis linkage, you can connect four stepper motor drives or servo drives. 1 status LED, indicate connection status on the board. Maximum Step-pulse Frequency: Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor;. Support Automatic Probe Tool: Support automatic probe tool .Have 0-10V outputβ¦
Read more about this product
3 Review
VILROS PI 4 COMPATIBLE USE AND STORE CASE: Plastic Storage case is best for those who want to be able to store their raspberry pi in a convenient all in 1 package when not in use. USE YOUR PI: Case Holds the Pi with full access to all the ports, in addition you can open the cover and access the GPIO pins for any project. STORE YOUR PI AND ACCESSORIESβ¦
Read more about this product
3 Review
So While using Arduino UNO with Base Shield v2, please turn the switch to 5v position; While using Seeeduino Arch with Base Shield v2, please turn the switch to 3.3v. Board Compatible: The number of pinout is the same as that of Arduino UNO R3. Attention: If using Base Shield v2 with Seeeduino V3, please solder the pads, P1 and P2. As an expansion boardβ¦
Read more about this product
3 Review
The Ethernet Kit for Teensy 4.1 has all the parts needed to connect to the Ethernet port on the Teensy 4.1. This kit includes the following: one (1) Ethernet MagJack, one (1) bare circuit board, one (1) ribbon cable assembly, two (2) header pins, and one (1) capacitor. PLEASE NOTE: Soldering is required. Teensy 4.1 is NOT included.
3 Review
Our miniBOSS DAC is also unique, because of the way we have implemented the power design. First, we separate the power on 3 channels and filter it: one for the digital side, the second for analog and third for the clocks themselves. Then we take the filtered power and use a second filter (LDOs) to further quiet the noise. In addition, we use Japaneseβ¦
Read more about this product
3 Review
Includes everything you need to Build a Raspberry Pi Powered Desktop Computer. Includes: Raspberry Pi 4 Model B With 4GB Ram--Official 7" Touchscreen For Raspberry Pi--Case That Holds the Screen and Pi Board--3000mA 5.1V Power Supply (Powers the Pi board which then Powers the Screen)--15 Inch Wireless Keyboard With Touchpad --32GB Class 10 Micro SD Cardβ¦
Read more about this product
3 Review
This is a Raspberry Pi GNSS HAT based on MAX-M8Q with multi-constellation receiver support, which means up to 3 types of GNSS satellite systems can be used together, including GPS, Beidou, Galileo, and GLONASS. It also support augment systems like SBAS, QZSS, IMES, and D-GPS. It features accurate & fast positioning with minor drifting, low powerβ¦
Read more about this product
3 Review
STM32F3 CPU, F3 + BEC. ICM-20608-G Accelerometers and Gyroscopes SPI. Input: 2-4S LIPO. Micro USB socket. Weight: 3.68g. Size(PCB): 27*27mm. M3 mounting holes: 20*20mm. Specially design for 80-130mm mini FPV Racing Drone,such as 80mm 90mm 100mm 110mm 120mm 1300 class.
3 Review
ASRock USB 3.2 Gen2. ASRock Full Coverage M.2 Heatsink. Supports 10th Gen Intel Core Processors and 11th Gen Intel Core Processors (LGA1200).
3 Review
ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage. The voltage output terminals of the ATX power expansion board correspond to each screw terminal. Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally forβ¦
Read more about this product