🔧 Fittings

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

1-Piece forged brass body. CSA CR91-002 Certified for use on piping; ANSI Z21.15 / CSA 9.1 Certified for appliances and appliance connectors. ASME B16.44 Certified for use in above ground piping systems up to 5 PSI. Made in Italy.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

PN series is high performing, extremely compact push-in full metal fitting. To connect, simply push the Straight-cut tubing (Outer Diameter) in metal sleeve; the stainless steel teeth grip onto the tubing and lock it. Working Temp.: -4 ~ 160 Fahrenheit/ Max. Working Press: 261 PSI. 1/4" OD Tubing X 1/8" NPT Male (Nominal Ourside Pipe Diameter OD: 0.405")…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Product Type —— Adapter(1/4"Male NPTx 1/4"Female NPT) with protective case,for industry connecting pipes or fittings with different end types, diameters, or materials. Product Material —— Forging of 304 stainless steel strength and resistance to corrosion. Working Temperature —— Temperature range from -868 to 1472 degrees F/-500 to 800 degrees c…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Adapter for connecting pipes or fittings of different types. Hub opening on one end and female National Pipe Taper (NPT) threads on the other for connecting two pipes with different ends. ABS-DWV for chemical and corrosion resistance, performance under wide temperature ranges, and light weight for quick assembly. Smooth interior finish for reduced…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

High quality brass for leak-proof reliability. Our brake line unions are made with unmatched superior quality. Made of durable brass which is resistant to corrosion from salt that can be used on roads in the winter. Works with steel, copper nickel, copper coated steel, PVF-coated, and stainless steel lines. Lifetime warranty included on all products…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

✔【3 Sizes Large Hose Clamp】- With this set you have 4-6 inch sizes. Our set contains 6 stainless steel clamps in 3 different sizes, each with 2 pieces of the clamping ranges 91-114mm, 118-140mm, 141-165mm, and a bandwidth of 12 mm. ✔【Material】- Made of heavy-duty high-quality 304 stainless steel, corrosion-resistant, sturdy, firm and reliable, will not…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

1/4" Male thread and male thread with 90 degree for connecting pipe; hard connect way so it does not need sealing for most situation;. Meet NPT requirement of US, better than NPT thread, could be used as NPT thread, too;. Good raw material brass, high corrosion resistance, low magnetic characteristics and high temperature ductility;. Meet ASTM B584 and…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Notice:Our Connector Has Been Redesigned. It is Easier to Install Without Clips.The Product You Received Has No Clip. Don't Worry, This is Our Latest Product.Included Clips is Our Old Batch of Product. Material: POM(Polyoxymethylene), Plastic push to connect Tubing fitting.Straight Ball Valve, (pack of 10). Connect and disconnect quick and easy without…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Protects hot water space heating boilers Compact construction, produces exceptionally high capacity Protects boiler installations up to 550,000 Btu/hr at 30 lb. This product adds a great value. This product is manufactured in United States.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Adapter for connecting pipes or hoses of different types. Connects a hose on one end and a female NPT threaded connection on the other. Glass-reinforced polypropylene for rigidity, lightweight, dimensional stability, and resistance to heat, corrosion, most chemicals, and high impact. Integral hex nut for using a wrench to tighten the fitting. Maximum…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Nipple for connecting two threaded pipes. Male NPT threads for connecting to female threaded pipes. Lead-free red brass pipe fitting. Operating temperature range of -53 to +121 degrees. Meets ASTM B584 standards for quality assurance and ASME/ASMI B16 technical specifications. These fittings contain lead and are not allowed by federal law to be…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

XFITTING 1/2" Compression Ball Valve, For 5/8" OD Tubing. 600 PSI WOG - Water, Oil and Gas. Lead Free Brass.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Elbow Male 1/4" NPT to 1/4" Tube OD Union,pack of 10. For RO Water System, Water filter,Drinking water, Water Purifier tube fitting.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Flexible Coupling Compatible with cast iron, plastic, copper, lead, and steel piping. Flexible Connectors are Leak-Proof, Rot-Proof and Sealed Against Infiltration and Exfiltration. May be used for non-pressure drain, waste, and vent (DWV) piping systems and sewer systems indoors and outdoors. Conforms to ASTM C1173, CSA B602, Certified and UPC Approved…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

90-degree elbow for connecting pipe at an angle. Fitting connects to schedule 40 PE pipe on both ends. PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons. Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately). Meets ASTM D 2609 standards for plastic insert fittings…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Tube O.D. size: 1/4". Thread size: 7/16-20. Plastic compression sleeve. Use with copper, brass, aluminum, or plastic tubing. -65 degree F to +250 degree F temperature range.

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Product Type —— Adapter(1/4" NPTx 3/8" NPT) with protective case,for industry connecting pipes or fittings with different end types, diameters, or materials. Product Material —— Forging of 304 stainless steel strength and resistance to corrosion. Working Temperature —— Temperature range from -868 to 1472 degrees F/-500 to 800 degrees C. Maximum Pressure…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Size: 1/2" NPT Female x 1/2" NPT Male (National Pipe Taper female to male threads). Matertial: Made of heavy duty stainless steel 304, durable, strong and corrosion resistance. Suitable for connecting two thread pipes at a 90°angle to connect, terminate, control flow and change the direction of piping. Great designed for water filters. Size fits…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

DO YOU WANT TO SET YOUR WATER BOILER AT 140° F SO YOU CAN KILL HARMFUL BACTERIA BUT ARE WORRIED ABOUT CHILDREN GETTING SCALDED? TEMLOCK thermostatic mixing valve allows you to set your water heater at 140° F. Then simply set the valve at the safe temperature of around 120° F. DO YOU WANT THE WATER TEMPERATURE OF YOUR SOLAR HOT WATER SYSTEM TO BE MORE…

3 Review

🚰 Hydraulics, Pneumatics & Plumbing, 🔧 Fittings

Plug for closing the end of a pipe or fitting. Male NPT threads for connecting to female NPT threaded pipes. PVC for chemical and corrosion resistance, high strength, and less weight than fittings made from metal. Maximum operating temperature of 140 degrees F. Meets ASTM D1784 and D2466 standards for quality assurance, and certified by NSF…