🔧 Fittings
2 Review
🔷Package Content:10 x Access Valve. 🔷Used in air conditioner to charge refrigerant. 🔷Perfect air conditioner replacement parts. 🔷Total Size:63x13mm/2.48"x0.51"(L*W). 🔷Made of high quality brass,durable and sturdy.
2 Review
UNIPUMP solenoid valves of the BCX series are installed on pipelines and, depending on the design (normally closed or normally open), open or shut off the flow of liquid (water or other liquids) when a control voltage is applied to the coil (solenoid) of the valve.
2 Review
Brass. Solid square head plug for closing the end of a pipe or fitting. Male National Pipe Taper (NPT) threads for connecting to a female threaded pipe. brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F). These fittings contain lead…
Read more about this product
2 Review
【Material】barb connector, made of stainless steel 304, last for long lifetime,resistant to corrosion,low magnetic permeability. 【Size】3/8"Barb x 3/8"Barb x 3/8"Barb, Can be connected with 3/8" Hose ID. 【Compatible】stainless steel barbed fittings can be used with PVC, PU, Rubber hose or tubing.The pipe clamps can create a tight seal on flexible or…
Read more about this product
2 Review
Unique 3-way valve acts as a diverter or mixing valve. Quarter-turn handle design for simple flow control. Constructed of lead free dezincification resistant (DZR) brass for superior reliability and strength. Push-to-connect joints require no heat, solder, solvents or tools.
2 Review
Inner Spring Blocks Reverse Flow In Piping Systems. Heavy Duty Cast Brass Body And Disc; Dezincification Resistant; Corrosion Resistant; Lead Free. Threaded Ends Comply With ANSI.B2.1. CSA Approved; Conforms To NSF/ANSI-61/372. 200 PSI CWP (Non-Shock).
2 Review
Hex bushing for connecting two pipes with different diameters. Male NPT threads on one end and female NPT threads on the other for connecting pipes with different ends. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperature range of -53 to +121 degrees. Meets ASTM B584 standards for quality…
Read more about this product
2 Review
Adapter for connecting pipes or fittings of different types. Fitting connects to schedule 40 PE pipe on one end and has an NPT female connector on the other. PVC for strength and resistance to reactions with acids, gasoline, alcohol, and hydrocarbons. Barbed fitting creates a tight seal on flexible pipe when used with a hose clamp (sold separately)…
Read more about this product
2 Review
No tools required, easy to install, quick connect fitting. Mini quick connect push 1/4-Inch tube OD. Standard fitting for water filter systems and RO Water System using 1/4" water filter tubing. Provides a permanent/removable leak-proof connection. Suitable for water and food applications
1 Review
For use with 3/8" to 1" inlet float valves and 1/4"-20 threaded rods (sold separately). Polyethylene for chemical resistance. 1/4"-20 female threads for mounting. Molded in one piece to resist leakage.
1 Review
Short flare nut for connecting to a tube or fitting. Connects to copper, brass, aluminum, or steel tubing. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Operating temperature range of -65 to +250 degrees F. Resists mechanical pullout for a more secure connection. These fittings contain lead and are not…
Read more about this product
1 Review
Measurement: 0.5 inch thread, length:1.57 inches. Hex nipple connection type: NPT 1/2 male X NPT 1/2 male (National Pipe Thread). Material: 304 Stainless Steel with great resistance to corrosion.(Brass is too flimsy and will broke in use), which can be connected to copper, brass, plastic, aluminum, and welded steel. Available for full range of liquids…
Read more about this product
1 Review
Internal Hex applicable for 1/4 Inch Wrench. Recommended use with Thread Seal Tape (Teflon tape). Sealing: Countersunk plug with a hex drive for closing the end of a pipe or fitting. Material: Made of high-quality brass with superior anti-corrosive properties suitable for use in wet environments. Applications: It is commonly used to seal holes in…
Read more about this product
1 Review
Hex plug with SAE 45-degree flare male end terminates tube size fitting. Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. For use with LP and natural gas, refrigeration, and hydraulic applications. Used With: Copper, brass, aluminum and steel hydraulic tubing that can be flared. Low cost and reusability…
Read more about this product
1 Review
【Package include】40 pcs 3/16", 40 pcs 1/4", 50 pcs 5/16", 40 pcs 3/8", 30 pcs 1/2" and a complete package. 【Application】Connects to copper, brass, aluminum, or plastic tubing, used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way. 【Material】Made of pure brass, ductility at high temperatures, and low magnetic permeability…
Read more about this product
1 Review
Solid Brass Construction. Precision milled. Center hex nut provides solid grip while installing. Full flow design.
1 Review
1" X 3/4" Brass Barb Splicer Reducer Fitting. 150 PSI maximum working pressure. -40° to 160° Temperature Rating. Backed by EDGE Industrial full manufacturers warranty. NOT DEEMED LEAD FREE. NOT FOR POTABLE WATER.
1 Review
Directly from The Famous Pex Systems Manufacture. 2 Pieces 1/2 Inch Pex Brass Full Port Shut Off Ball Valve HOT AND COLD(Red and Blud Handle). Certified with ASTM F1807 NSF/ANSI 61. Compatible with Stainless Steel Clamp & Copper Crimp Ring Systems. Compatible with all types and brands of PEX Tubing - Watts, Everhot, Viega, Zurn, Nibco, Bow, etc.
1 Review
【DIY Hose Clamps】: You can trim the stainless strap at any length you want easily to adapt to different hoses. The custom hose clamp can also be adjust the size by reducing its diameter with a screwdriver, to meet your various needs. 【Large Hose Clamps】: The hose clamps kit comes with a 10 FT metal strap and 8 fasteners in total, suitable to cut and get…
Read more about this product
1 Review
【Product Name】 Simple Installation Pneumatic Push To Connect Fitting. 【Material】Plastic. 【Size】1/4" OD【Type】 plug. 【Maximum Pressure】0~145Psi【Working Temperature】32~140°F. 【Features】Quick And Simple Installation.