🪚 Hole Saws & Accessories
2 Review
Hole drill bit Material: HSS high speed steel(hole drill bit). Hole drill bit are through a special heat treatment, sharp edge, high strength. The carbide teeth of the hole saw kit is able to cut clean, round holes in stainless steel, mild steel, iron, aluminum plate, alloy plate, plastic sheet, copper and brass. When you use the hole saw drill bit, you…
Read more about this product
2 Review
【Good Quality Material】The main material is metal, and the grinding head part is coated with emery, which is hard and wear-resistant. 【Cutting Hole Diameter 】 5 mm / 3/16". 【Size 】49mm shank and 53mm total length. 【Usage】 Suitable for use in drill hole on glass, marble, tile or granite.Please add water for coolant and drill slowly. 【Package Content 】10…
Read more about this product
2 Review
Hole Drill Bit Size: 20mm / 0.8" ; Material: HSS, Titanium Plated. Openings for stainless steel, iron, aluminum, and various types of pipes. High precision, smooth cutting, especially impact resistance, wear resistance. Hole drill bit is through a special heat treatment, sharp edge, high strength. Long life durable and practical. Perfect for Installing…
Read more about this product
2 Review
Set up in 3 easy steps. Easy cutting in uneven surfaces. Generous 2-1/4" (57 mm) hole saw depth. Eject saw plugs with ease. Carbide Tipped Hole Saws.
2 Review
High speed steel tooth provides long tool life. Designed to run at high speeds with very little torque. Cuts wet, frozen, pressure treated, and hard wood without binding. Cuts at an angle for more versatility. Unique design allows easy plug removal. Kit contains 2-1/8", 2-1/4", 2-9/16", 2-3/4", 3-5/8" 4", 4-5/8"hole saws; 2L 1/2"standard arbor, and two…
Read more about this product
2 Review
Diameter 5/8", Max. drilling depth 2";. 5/8-11 thread fits on most popular high-speed grinders;. Use on the job site without using water;. Aggressive cutting on granite and engineered stone;. Max. speed 11,000 RPM.
2 Review
Perfect for DIY tile installations. Diamond-grit cutting rim. Well lubricated for long life of drill bit. Kit includes water suction cup and mounting tape. Cuts ceramic, porcelain, marble, and granite.
2 Review
The best cutting result for drilling in asphalt, brick, concrete, dry wall, marble, tile, wood, composite, etc; Carbide Tip Pilot Drill bit is required. Fit arbors with 5/8-18 UNF Thread; 2-1/4“ Cut-Depth allows for easily cutting through thick or layered building materials in one pass. Quality Carbide Teeth have high hardness, outstanding wear…
Read more about this product
2 Review
Ideal for cutting stainless and high alloy steels, non-ferrous light metals and reinforced fabrics at a much faster speed than bi-metal hole saws. Tough tungsten carbide tipped teeth have a positive cutting angle which provide fast and efficient removal of chips and swarf. Ideal for production cutting and particularly suitable for use in drills with…
Read more about this product
2 Review
Cuts extremely hard abrasive materials. Cutting edge of tungsten carbide particles bonded to alloy steel back. High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting. Made in China.
2 Review
Ideal for electrical and plumbing tradesman. Hole saw has thin .020-Inch sidewall blade thickness which allows for faster cutting and longer battery life. Ideal for chargeable impact drivers. Special 8 TPI tooth design for smoother cuts in sheet metal. Made in China.
2 Review
1-3/4-Inch depth. Tough 3/16-Inch thick back plate. Deep gullet design for improved chip removal. Cuts through 2-Inchx4-Inch in one easy pass. Faster cutting and more holes per saw.
2 Review
2-1/2 inch diamond hole saw, for tiles, glass, ceramics, porcelain, quartz, granite. Standard triangular 3/8 inch shank fits standard drills. Steel alloy body with side slots help cooling the tool and extracting material core. Increased tool body for thicker 3cm quartz countertops. Depth of cut is over 1-1/4 inches. Drills Through Toughest Materials…
Read more about this product
2 Review
The best cutting result for drilling in the thin metal sheet, pipe, plastic, wood, composite, etc. Not for Asphalt, Brick, Concrete, Tiles, etc. Fit to arbors with 5/8-18 UNF Thread; 1-3/4 Inch Cut-depth allows for specialty cuts; Easily cuts through materials in one pass. Precision Vacuum hardened 4/6 TIP teeth increase abrasion resistance, roughness…
Read more about this product
2 Review
> 1 X 3"(76mm) Bi-Metal Hole Saws With in 40 mm Max Cutting Depth > 1 X Mandrels, > 2 X Drill Bits, > 1 X Hex Key > 1 X Ejecting Spring. Cuttex Tools Bi-Metal Hole Saw Made of High Speed Steel (HSS) Bi-Metal, The Cutting Edge is Made of High Hardness (75~81 HRC) + %8 Cobalt, That Makes Huge Different While Working with it and Very Long Lasting Life Of…
Read more about this product
2 Review
❶SIZE: 25mm(1”) hole saw diameter, 86mm(3.38”) length, 10mm(0.39”) shank. ❷RESISTANT and DURABLE: hole saw is made of HSS high speed steel, with extremely sharp blade, low consumption and durable with impact resistance, wear resistance. ❸PRECISE and EFFICIENT: tungsten carbide teeth of the hole saw is able to cut clean, round holes in stainless steel…
Read more about this product
2 Review
Bi-metal H.S.S. Hole Saw with varied toothing ensures a even cut and requires less effort. High rotational precision. Sturdy body construction. Positive chipping and cutting angles ensure more aggressive and faster cutting. The reduction in vibration and heat development during cutting achieves up to three times the tool life.
2 Review
✔ Product Contain: 1 x 81mm M42 Bi-Metal Hole Saw; Color: Black. ✔ Product Material: Made of M42 alloy material, which has a longer service life than other materials. High hardness, durable and rust-proof. ✔ Product Size: Cutting Diameter(Approx.) : 81mm/3.19"; Hole Saw Depth: 38mm/1.5". ✔ Application: Iron Board, Acrylic, Ducts, Cinder Wall, Cornhole…
Read more about this product
2 Review
A cost effective solution for cutting nail imbedded wood, or wood and metal combination, reinforced concrete and fiberglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten carbide tipped teeth for outstanding cutting performance and product durability. Will cut nail…
Read more about this product
2 Review
Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saws. Carbide tipped teeth for outstanding cutting performance and product durability. Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. 2-1/8-inches cutting depth.