🪚 Hole Saws & Accessories
1 Review
【QUICK CHANGE】MKC hole saw mandrel is convenient and time-saving to use, more than 2 times more time-saving than traditional arbor; surpasses the traditional metal materials. the plastic block is easy to grasp and force, and the material is light, strong, and clean. 【CRAFTSMANSHIP】Body is processed by CNC, with good precision: small swing and small…
Read more about this product
1 Review
package:5 plastic boxes, 5 Drill Bit Hole Saw Set, and 5 hex key wrenches. Cuts Steel, Stainless Steel, Copper, Brass, Aluminum, Fiberglass, Formica And Other Laminates In Seconds. Outside Diameter:16mm/0.62'',18.5mm/0.71'',20mm/0.78'',25mm/0.98'',30mm/1.18''. Perfect for Installing Locks, Knobs in Doors and Cabinets or Drilling Larger Diameter Holes…
Read more about this product
1 Review
SMOOTH CUTTING: Designed with the non-binding clean edge and sharp teeth, the heavy duty 6-1/8''hole saw can cut faster, smoother, and more precise holes than most hole saw on the market. EXCELLENT MATERIAL: This hole saw is made of M42 high-speed steel and bi-metal, with higher hardness (≥65HRC), higher toughness, higher cutting strength, and stronger…
Read more about this product
1 Review
Progressor tooth design cuts faster and lasts longer in wood and metal applications. Reinforced shoulder for added strength and longer life. 8 percent cobalt alloy for longer life and higher heat resistance. Works with standard or Quick Change mandrels (Quick Change requires adapters).
1 Review
Brass cutter block with contoured edges to minimize gasket material buckling and assure precision cuts. Heavy-duty blades ensures precise cuts through any gasket material. Chrome-plated, steel extension bars provide for gasket cuts up to 61” (1550mm) in diameter. 18” x 18” (457mm x 457mm) board features plastic non-slip, textured surface that reduces…
Read more about this product
1 Review
The best cutting result for drilling in asphalt, brick, concrete, dry wall, marble, tile, wood, composite, etc; Carbide Tip Pilot Drill bit is required. Fit arbors with 5/8-18 UNF Thread; 2-1/4“ Cut-Depth allows for easily cutting through thick or layered building materials in one pass. Quality Carbide Teeth have high hardness, outstanding wear…
Read more about this product
1 Review
✅【QUALITY IRON】 Our hole saw for glass drill bit could reduce friction from the drill bit and plastic hole during operation. With strong Suction Base Thicken rubber, hole saw for glass drill bit set is more durable. ✅【MULITPLE SIZES】Applicable from 4-12mm holes. Sets come with multiple sizes from 4mm-12mm. This glass drill bits totally 6pcs. Diamond…
Read more about this product
1 Review
✔ Product Contain: 1 x 41mm M42 Bi-Metal Hole Saw; Color: Black. ✔ Product Material: Made of M42 alloy material, which has a longer service life than other materials. High hardness, durable and rust-proof. ✔ Product Size: Cutting Diameter(Approx.) : 41mm/1.62"; Hole Saw Depth: 38mm/1.5". ✔ Application: Iron Board, Acrylic, Ducts, Cinder Wall, Cornhole…
Read more about this product
1 Review
The Holcutters, are not hole saws. They're precision ground, heat treated tools that easily cut thru the stock rather than ripping, tearing, and pushing thru as do typical hole saws. They can produce holes three times faster and cleaner than hole saws in sheet metal and have dramatically extend tool life, too. All sizes have a "shoulder" to prevent…
Read more about this product
1 Review
【HIGH PERFORMANCE】the hole saw made of M42 high speed steel and bi-metal ,four slots for quick remove the chipped material,heavy duty and durable with large and sharp variable teeth pitch for fast and precisely cutting. 【DIMENSIONS】diameter of the hole saw about 190mm for 7 1/2 inch hole cutting, depth of the hole saw about 1 1/2 inch (38mm). 【QUICK…
Read more about this product
1 Review
Accessory for the "12,000 Series" Cutters. 3/4-inch cutter diameter. Made of hardened high speed tool steel and precision ground. Features a 3/4-inch diameter shank. Modified end tooth geometry for stacked plate drilling is available.
1 Review
Progressor tooth design cuts faster and lasts longer in wood and metal applications. Reinforced shoulder for added strength and longer life. 8 percent cobalt alloy for longer life and higher heat resistance. Works with standard or Quick Change mandrels (Quick Change requires adapters).
1 Review
Provides a smooth cut, with minimal tendency to bite or snag on contact with irregular surfaces. Constructed of hardened steel and abrasion resisting high speed steel teeth with a tough alloy body and cap. 5-1/2 teeth per inch/25mm make this Saw ideal for thinner gauge material. Cutting depth of 41 mm (1.5/8”).
1 Review
The best cutting result for drilling in asphalt, brick, concrete, dry wall, marble, tile, wood, composite, etc; Carbide Tip Pilot Drill bit is required. Fit arbors with 5/8-18 UNF Thread; 2-1/4“ Cut-Depth allows for easily cutting through thick or layered building materials in one pass. Quality Carbide Teeth have high hardness, outstanding wear…
Read more about this product
1 Review
The item is made of high quality carbide tipped metal material. They arey widely used for drilling walls, stones, bricks,or installation of air-conditioning etc. The item is simple to operate,easy to use. It is with SDS plus shank, male thread Adapter . Good to replace the broken adapter with your drill chuck. Material: carbide tipped metal, which makes…
Read more about this product
1 Review
New Rapid Core eject holes saws allow you drop out the core at the touch of a button. Made with tough bi-metal steel. Variable tooth pitch guarantees a fast and clean cut through all thicknesses. Cutting depth of up to 1-7/8".
1 Review
SIZE - 12mm(15/32-inch) Drilling Diameter, 6.5mm(0.26-inch) Shank Diameter. DIAMOND COATED - Diamond coating enhances the drilling speed, which makes the bit more sharp. NICKEL PLATED SURFACE - Nickel plating surface can extend the service life and enhance the surface corrosion resistance. SPECIAL DESIGN - Slotted edges make it more sharp, work more…
Read more about this product
1 Review
【Construction Grade】- 2.75" Hole Saw is made of HSS M42 & high speed steel, impact resistance, wear resistance. With higher hardness, higher toughness and stronger resistance. Well made, sharp, hard, lasting. Comes with drill bit hardware. 【Clean Edge Design】- 70mm Hole Saw with the non-binding clean edge design. This hole saw cuts smooth and easy…
Read more about this product
1 Review
The best cutting result for drilling in asphalt, brick, concrete, dry wall, marble, tile, wood, composite, etc; Carbide Tip Pilot Drill bit is required. Fit arbors with 5/8-18 UNF Thread; 2-1/4“ Cut-Depth allows for easily cutting through thick or layered building materials in one pass. Quality Carbide Teeth have high hardness, outstanding wear…
Read more about this product