π° Hydraulics, Pneumatics & Plumbing
3 Review
Robust and durable. Easy installation without leakage ball valve. Fit 3/8 Inch inside diameter, 1/2 Inch outside diameter hose. Large butterfly handle, easy to achieve low torque smooth rotation handle.The red handle can be adjusted or completely turned off for easy operation. Easy installation.No glue, tools or fixtures are safe and easy toβ¦
Read more about this product3 Review
Pipe OD:25mm (1"). Ferrule Size: 50.5mm Ferrule OD fits 1.5" tri clamp. With FOUR openings for connecting and branching three pipes or tubes. High pressure durable, stainless steel 304 for resistance to corrosion and high temperatures. Clamps to tubing on all three ends for a non-permanent seal, providing take-down access.
3 Review
β γMaterialγ: Solid Brass construction. Durable Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. β γSIZEγ: 3/8 inch Barb x 1/4 inch NPT,Maximum pressure rating of 300 psi,Temperature range of -40 to +250 degrees F. β γIntroductionγ: With these fittings, hoses can be customized to any length, allowing yourβ¦
Read more about this product3 Review
Stainless steel 50%, plastic 10%, silicone oil 30%, copper 10%. Hydraulic tester max work pressure: 9,000 PSI/600 Bar/60 MPa, 3 test hoses, 60 inch long. Hydraulic test point coupling: M10*1, M14Γ1.5, G1/4,UNF7/16-20, NPT1/4-18. Hydraulic pressure test kit has 3 pressure gauge Γ63mm, 3625 PSI (250 Bar/25 MPa), 5800 PSI (400 Bar/40 MPa), 8700 PSI (600β¦
Read more about this product3 Review
1:anolog pressure gauges: 5 type; mini test hose: 3 pcs; test couplings: 20 pcs;. 2: Repair tools for USA Japanese European Brand excavator or hydrulic systems. 3: quick connector A *2 pcs; quick connector B *2 pcs; quick connector C types *2 pcs;. 4:Max working pressure: 9000PSI/600BAR. 5: packing weight is : 10 pounds; Compact Aluminum Case; easy toβ¦
Read more about this product3 Review
Fits 1/2 and 3/4 inch pressure vacuum breaker. Replacement Bonnet And Poppet Kit. Consists Of O-Ring And Gasket. No special tools required for servicing. Factory replacement parts. All parts are made of high quality materials.
3 Review
Adapter for connecting pipes or fittings of different types. Barbed male insert on one end and a socket connection on the other for connecting flexible tubing to pipe. PVC for corrosion resistance, high strength, and less weight than fittings made from metal. Smooth interior finish for reduced friction and material buildup. Meets NSF/ANSI 61 Annex Gβ¦
Read more about this product3 Review
Case Quantity Of 1. Brilliance Stainless. Country Of Origin: China. From The Brand Name: Delta Faucet.
3 Review
Nickel plated brass fitting guards against corrosion. 175 psi maximum working pressure. Double O-ring compression style fitting, tubing can be removed from fitting if needed. Use only with Maxline 3/4-Inch system.
3 Review
Material:CA 360 brass for barstock,high quality, provide high resistance to abrasion and corrosion. Size: 1/4" Barb to 1/8" Male NPT, Barbed fitting for a tight seal on hoses and NPT threads for a tighter seal than straight threads. Pressure:Will withstand burst pressures of plastic tubing. Temperature Range:From -40Β°F to 160Β°F. Typicalβ¦
Read more about this product3 Review
Type: Hypro 6500 Pump Repair Kit, Brand: Hypro. Non-Domestic Product: No. Modified Item: No. Custom Bundle: No. Mpn: 3430-0380.
3 Review
Made of high quality stainless steel, corrosion resistance, ductility at high temperatures, and low magnetic permeability. Bulkhead union coupling for connecting two hoses with the same diameter in a straight run. Temperatures range from -40 to 160 F. The mini-barb ends are push-to-connect and do not require hose clamps. The joint of two openings areβ¦
Read more about this product3 Review
Product Type: Mechanical Components. Package Quantity: 1. Package Dimensions: 11.0 cms (L) x 17.1 cms (W) x 22.3 cms (H). Package Weight: 0.311 kilog.
3 Review
D: .6'', L: 2.4'' - See Drawing for Dimension References. Fluid Temp Range: -20Β°F to 302Β°F, Use for water, oil, air, gas, Light Acids/Alkali. Stainless Steel Spring-Loaded, Low Cracking Pressure (~5 Psi). Serviceable Valve - Can be taken apart via threads, Female NPT Ports. Use to direct flow in one direction.
3 Review
Nickel plated brass fitting guards against corrosion. 175 psi maximum working pressure. Double O-ring compression style fitting, tubing can be removed from fitting if needed. Use only with Maxline 1/2-Inch system.
3 Review
M22 Female X 3/8 Quick Connect Socket. M22X1.5 Fitting. Common Hose Connect from Machine to Hose. USA SELLER.
3 Review
Premium Materials: hose clamps are all 304 stainless steel to provide maximum corrosion resistance to salt and most chemicals. The worm drive hose clamps comply with SAE standards. stainless steel hose clamps are salt resistant, anti-rust, anti-corrosion, water proof and oil proof; hose clamps are reliable, strong, reusable and durable. Remarkableβ¦
Read more about this product3 Review
Product Type: Mechanical Components. Package Quantity: 1. Country Of Origin: United States. Package Dimensions: 0.508 cms (L) x 4.445 cms (W) x 1.27 cms (H).
3 Review
Includes a 3 foot hose. Pressure range of 10 to 60 pounds per square inch or 80 to 840 kilopascal. Thread size 3/8-24. Full swivel air chuck head. Made in USA.
3 Review
Diameter: 2". Connection Type: Male Adapter x Hose Shank. Maximum Operating Pressure: 125 psi at 70Β°F. Smooth Sealing Surface. Locking.