🔧 Linear Motion Products
2 Review
【Product Structure Analysis】- Nema23 Stepper Motor+Stepper Motor Connecting Piece+Coupling+1605 Ball Scew+Slide Block+Sliding Table +Bearing Piece+Base. 【Nema23 Stepper Motor】- Motor length: 56mm. Motor flange size: 57mm. Holding torque: 1.2N.m. Phase: 2. Current: 3A. Resistance: 0.8 Ω. Inductance: 2.4mH. Rotor Inertia: 440g.cm. Wiring: Red(A+)…
Read more about this product
2 Review
Directly Applied for Linear Actuator: This DC gearmotor has an integrated M3*55mm threaded rod as its output shaft, turn it into a linear actuator. Directly Applied for Linear Actuator: This DC gearmotor has an integrated M3*55mm threaded rod as its output shaft, turn it into a linear actuator. Reducing Speed to Offer More Torque: Gear motors are…
Read more about this product
2 Review
【RAIL SIZE】Length: 250mm/9.75"; Width: 7mm/0.273"; Pitch: 15mm/0.585"; Rail fixing bolt size: M2x6. 【BLOCK SIZE】Model: MGN7C (Pre-loaded); Length: 22.5mm/0.878"; Width: 17mm/0.663"; Block fixing bolt size: M2x2.5 (Please refer to Parameters Picture for more detailed information.). 【ADVANTAGES】Made of high-quality passivated Bearing Steel with low…
Read more about this product
2 Review
2Pcs SBR16-600mm Linear Rail + 1Pcs SFU1605-600mm Ballscrewï1⁄4ˆwith ending machinedï1⁄4‰ + 1Set BK/BF12 + 4Pcs SBR16UU + 1Pcs DSG16H Ballnut Housing +1Pcs D25L30 Coupling. Package Includedï1⁄4š.
2 Review
2Pcs SBR16-1200mm Linear Rail + 1Pcs SFU1605-1200mm Ballscrewï1⁄4ˆwith ending machinedï1⁄4‰ + 1Set BK/BF12 + 4Pcs SBR16UU + 1Pcs DSG16H Ballnut Housing +1Pcs D25L30 Coupling. Package Includedï1⁄4š
2 Review
Material: Made of high quality 304 stainless steel, excellent corrosion resistance and rust resistance. Size: Thread Dia.: M3 Total Length: 300mm / 11.8". Fully threaded rod,thread along its entire length.Right Hand Thread. Great products for standard and DIY.For assembly and fastening, screw into threaded nut or threaded hole, cut to your desired length…
Read more about this product
2 Review
Overall length:249mm, Length of aluminum section:200mm. Effective stroke:200mm-77.15mm=122.85mm. Flexible coupling size:D20 L25-8mm to 6.35mm. Lead:8mm ( The lead screw moves 8mm in one turn). T-type screw length : 240mm.
2 Review
High Quality Materials: Stainless steel lead screw + copper nut. Lead Screw Length: 400mm, Lead Screw Diameter: 8mm, Lead Screw Spacing: 2mm. Lead of the Thread: 8mm. Stainless Steel Material, Does Not Rust, Durable. Easy to Install and Convenient to use, No Need to Process.
2 Review
【700MM HGR20 Linear Guide Rail】- This linear guide rail set includes 2 pieces of HGR20-700mm linear guide rail, 4 blocks, 1pcs M1605-700mm ballscrew, 1pcs ball nut, 1pcs BF12/BK12 nut, and 1pcs plum coupling. 【HIGH-QUALITY STEEL MATERIAL】- Linear guides are made of carbon steel, linear bearings made of GCr15 bearing steel. Surface chrome plating…
Read more about this product
2 Review
★ Specification: Stroke length = 450mm(18"); Retracted length = 600mm(24"); Extended Length= 1050mm(42“); Travel speed = 0.39 inches/sec (10 mm/s);Maximum current draw = 3Amps; Maximum Load = 225lbs(900N). ★ Material: High quality aluminum alloy material, sturdy enough and with fashion look, High performance motor ,Built-in high quality limit switch. ★…
Read more about this product
2 Review
Working Voltage DC 9-12V. The maximum linear speed is 25mm per second. Moving 0.25mm for one step, can use microstep driver if need smaller. Widely used for small devices such as medical equipment, laser engraving machine, etc. The motor need a A4988 driver(not included) to drive, can not directly connect to power.
2 Review
[Parameter] Workbench size: 1.3 inches square, X axis travel: 13mm, load bearing: 2kg. [Precision] The guide rail is a light-loaded linear ball-milled steel bar, and the displacement adjustment is driven by a miniature magnetic head with an accuracy of 5μ. At the same time, the spring return can eliminate the axial gap. [Convenient] The top and bottom…
Read more about this product
2 Review
Heavy duty linear actuator with 8 inch travel. Specifications: 12 volt DC [electrical], 770 lb max [static load]; 385 lb max [dynamic load], [Speed]: 7mm/sec @ 50% Load - 8mm/sec @ no load, Current: 1 [Amp Draw] @ no load. Overall Length: 17" (Min) to 25"(Max); Length Between Mounting Holes: 15.5" (Min) to 23.5"(Max). Example Industrial or Commercial…
Read more about this product
2 Review
COMPLETE LINEAR RAIL KITS - This linear rail set includes 2 pieces of 1000mm long rail shafts and 4 SBR12UU blocks. Sliding blocks to be used cooperatively with rails, smooth sliding provided by the inside linear bearing. HIGH-QUALITY STEEL MATERIAL - CNC parts linear rails are made of carbon steel, linear Bearings made of quality bearing steel with…
Read more about this product
2 Review
【Specifications】 Stroke length = 300mm(12"); Retracted length = 420mm(16.8"); Extended Length= 720mm(28.8''); Travel speed = 0.39 inches/sec (10 mm/s);DC12V; Maximum current draw = 3Amps; Maximum Load = 225lbs(900N). 【Material】 - The alloy-steel shaft accompanied by metal gears allows it to push and pull up to 225lbs(900N). 【Feature】 - Aluminum alloy…
Read more about this product
2 Review
Type: 37GB330 DIY Design Reciprocating Cycle Linear Actuator Motor. Voltage: 24V; No-load Speed: 5RPM; Rated Speed : 4 RPM; Stroke: 12mm 16mm 20mm ( 20mm in default, 12/15mm can be adjusted easily ). Bracket Made of Aluminum alloy, very sturdy construction inside and outside. The outside shell is well build and has excellent access to mounting screws…
Read more about this product
2 Review
Aluminum alloy support block for end or intermittent shaft support where loads are light and shaft deflection is minimal. Slit in the top surface of the support helps shaft insertion. Setscrew locks shaft in place. Flat square foot helps accurately align the block. Aluminum alloy for light weight.
2 Review
This heavy duty linear actuator is a powerful solution for lifting large loads. With a max static load of 770 lbs and 385 lb max dynamic load - 4" 12 volt DC linear actuator. Specifications: 12 volt DC [electrical], 770 lb max [static load]; 385 lb max [dynamic load], [Speed]: 7mm/sec @ 50% Load - 8mm/sec @ no load, Current: 1 [Amp Draw] @ no load…
Read more about this product
2 Review
MUST-HAVE DEVICE for furniture, home automation, and small applications needs. It’s easy to Install and integrate with just about any application. Available in 24VDC to implement into existing control systems. Do you own a MASSAGE SALON or DENTAL OFFICE? Use our actuator products for an improved ergonomic experience. It can be used on massage recliners…
Read more about this product