π§ Milling Accessories
2 Review
[4 Flute End Mill Cutter]: The 4 flute end mill cutter works are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc. [Well Performance]: Hardness of metal for above 30 degrees,with high bending resistance and abrasion resistance, exclusive to highβ¦
Read more about this product
2 Review
The cutting edge is sharp and wear-resistant, it is not easy to break the edge, the surface is clean and free of burrs, and the finished workpiece has high smoothness. The high-frequency welding process is adopted at the connection between the cutter head and the cutter body, which is durable and not easy to break the knife, which greatly improves theβ¦
Read more about this product
2 Review
Our Part # ALL-19508. Made of precision ground, high grade tool steel. 60Β° included angle, right hand cutting tool. 3/8" cutting diameter 3/8" shank diameter (with Weldon flat).
2 Review
High velocity milling of aluminum & other non-ferrous materials. 3flute and 45Β° helix allow harmonic balance at high speed condition and smooth cutting. Improved surface roughness-cylindrical margin which is controlled tightly. Maximum-metal removal rate. Superior chip evacuation.
2 Review
Type: Spiral (Upcut), Cutting Type: Single Flute with Flat End, Shank: 1/8" (3.175mm), Cutting Diameter: 1/8" (3.175mm), Cutting Length: 1" (25mm), Overall Length: 2" (50mm). Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, mortises, cycles and dados with clean edge and bottomβ¦
Read more about this product
2 Review
γTUNGSTEN CARBIDE USEγ20 pcs Solid Carbide Rotary Burr Set. Total length ca.38mm, cutting diameter 1/4 Inch(6mm), shank length 35mm, shank diameter 1/8 inch(3mm).carbide rotary burr set with 1 4-inch shank. γHEAT-TREATED DOUBLE CUT CARBIDEγMade of heat-treated durable double cut carbide, long life, sharp and strong;Nano blue coating enables the tool'sβ¦
Read more about this product
2 Review
standard : Cutting edge diameter: 1mm / 0.039"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 7mm / 0.28". material : Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency. features : High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistanceβ¦
Read more about this product
2 Review
Type: Chamfering router bits / Brand Name: JERRAY Tools. Shape: V-shape / Degree: 90Β°. Shank diameter: 1/4"(6.35mm). Total length:50-51MM (2"). Condition:Brand new and unused.
2 Review
Premium Sub-Micrograin Carbide End Mill Made In the USA. 1/8" Shank Diameter. 1/4" Flute Length (Length of Cut), 30 Degree Helix. 1-1/2" Overall Length Center Cutting Carbide Endmill. 4 Flutes.
2 Review
Suitable for machining on aluminum and other nonferrous materials. 42-degree helix provides increased cutting action compared to end mills with lower helix angles. Long-length end mills have longer cutting edges and can make deeper cuts than standard-length end mills. Two flutes offer better chip-carrying capacity than end mills with more flutesβ¦
Read more about this product
2 Review
Cutting diameter is 5/8". Cutting length is 1-3/8". Shank diamter is 5/8". Overall length is 3-3/8".
2 Review
3 flute design for smoother/quieter milling operations High performance ideal for Peripheral Milling of aluminum and non-ferrous materials Made of extra-fine grade carbide for ultra high transverse rupture strength Titanium Carbonitride(TiCN), allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3β¦
Read more about this product
2 Review
118 degree radial point. For general-purpose drilling and maintenance applications. Available with 3/8" reduced shanks. HSS substrate with general-purpose geometry. Black oxide finish for increased wear resistance and improved lubricity. Made in the USA.
2 Review
Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Aluminum titanium nitride is similar to TiAlN but with a higher aluminum content for improved hardness and smoothness. Round shanks allow use with a wide variety of toolholding systems. Can beβ¦
Read more about this product
2 Review
Package Dimensions: 5.08 cms (L) x 2.286 cms (W) x 2.286 cms (H). Package Quantity: 1. Product Type: Tools. Country Of Origin: China.
2 Review
Package Dimensions: 12 L x 8 H x 10 W (inches). Package Weight : 10 pounds. Country of Origin : China.
2 Review
High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance. Available in polished finish. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. When run in a counterclockwise direction (right-hand cut) spiralβ¦
Read more about this product
2 Review
Designed for general purpose micromachining. Cutter diameter down to .005". 30Β° helix. Center cutting. Square profile.
2 Review
Includes 9PCS following sizes: 1/8,3/16,1/4,5/16,3/8,7/16,1/2,5/8,3/4". High speed steel (M2), Single end?Ground. Shank Dia: 1/8",3/16",1/4",5/16",3/8" are 3/8 inch shank. 1/2"are 1/2 inch shank. Comes with Wooded stand. Center cutting
2 Review
Solid Carbide Ball Nose End Mill Made In the USA. 1/8" Shank Diameter. 1/2" Flute Length (Length of Cut), 30 Degree Helix. 1-1/2" Overall Length Ball End Carbide Endmill. 4 Flutes.