🔩 Nails, Screws & Fasteners
1 Review
★FITMENT★- Before ordering, please check the size of the nuts on the wheels. Only compatible with cone seat and 14x1.5 wheel Studs.If you are not sure whether these nuts are compatible with your car, please contact us. ★FEATURES★ - Our wheel lug nuts are made of high-quality steel and have a black surface formed by electrophoresis. The color is more…
Read more about this product
1 Review
Quick Release Pin for bimini top, boat tops and support poles, deck hinge etc. Diameter: 5/16"(8mm), Total Length:2.17"(55mm), Effective Length: 1.54"(39mm). All parts are made of Marine grade 316 stainless steel, Excellent seawater corrosion resistance and durable. Spring loaded ball in the tip of the pin holds it in place. Widely used in various…
Read more about this product
1 Review
Hex nuts are typically used with bolts and washers of the same finish. Lock washers are round with a hole in the center and can be used where loosening from corrosion or vibration is a concern. Parts all feature a corrosion-resistant zinc-plated finish. These metric hex nuts feature an M10 x 1. 5 coarse screw thread size. Contains 20 pieces.
1 Review
NOTE: Please tighten the lug nuts manually, DO NOT use electrical tools; Great Fitment For Your Vehicle Of Most Thread Size M12x1.5 lug nut. Benefit: Anti-theft, good hardness, colorful, and surface electrodeposited Chromium dealing process is more clear and clean pitch thread, grasp more tight; Material Type: surface electrodeposited Chromium + 50BV3…
Read more about this product
1 Review
Diameter: 1/2". Material: Brass. Driver Type: 3/4 Wrench. Thread Type: 13 (Coarse). Type: Hex Nut.
1 Review
This Are Easy To Use. This Are Highly Durable. This Is Manufactured In China. Brand Name: Westinghouse Lighting.
1 Review
The stainless nuts are 100% stainless steel 18-8 (304) which offers a high level of chemical and corrosion resistance. MewuDecor stainless six sided nuts are great for general applications and wet environments. They are strong, corrosion proof, and will support all of your project purposes. So confident that our hardware is the highest quality available…
Read more about this product
1 Review
[THREADED] - M5 x 10mm; Pitch: 0.8mm. [SIZE] - (overall) 16x10mm / 0.63"x0.39"; thickness(knurled part): 4mm / 0.16". [MATERIAL] - Made of 304 stainless steel, rust resistance and durable to use. [ADVANTAGE] - This facilitates tightening by hand, commonly used in electronics applications. [WIDELY USE] - Common on 3d printer beds, machine tools, cabinets…
Read more about this product
1 Review
Size: #8-32 x 0.12-Inch. Material: Stainless Steel, Surface treatment: Passivation. Outer Diameter(Max): 0.31"; Outer Diameter(Min): 0.21"; Length: 0.12". Suitable for a 0.1" thick mounting plate, the mounting hole diameter is about 0.17. Perfect for applications where a thin sheet requires load-bearing threads but still must remain smooth, with no…
Read more about this product
1 Review
Hex nut tightens from the side with a wrench, enabling use when there is limited space above the nut. Grade 8 steel is stronger than grade 5 steel and often used in applications where strength is the primary consideration. Zinc yellow-chromate plating offers good corrosion resistance. Meets ASME B18.2.2 specifications.
1 Review
Thread Size: M4; Outer Diameter: 14mm / 0.55"; Height: 4mm / 0.16". Material: Made of aluminum alloy, wear-resisting, and durable to use. Type: Round and Flat; Color: Black; Package Content: 5pcs x Flat Knurled Nuts. Great for use in electronic applications and things that require quick adjustments. Flat Knurled Nuts facilitate manual tightening, to…
Read more about this product
1 Review
Thread size: 1/2 inch - 20 inch. Height: 1. 40 inch. Hex size: 3/4 inch. Seating: Conical. For Aftermarket Wheels Only.
1 Review
All metal, free spinning nut. Reusable, serrated flange can span oversized clearance holes. Ratchet teeth on bottom for a tighter fit and loosening resistance. Coarse thread for durability. Zinc-plated for moderate corrosion resistance.
1 Review
[SIZE]: Width Measured From Flat to Flat 10mm / 0.39"; Height 6mm / 0.24". [MATERIAL]: Made of 201 stainless steel, firm and durable. [FEATURE]: With a nylon insert, these lock nuts greatly reduce loosening under vibrations and torque. [ADVANTAGE] : our hexagonal locking nuts are strong and can be used indoors and outdoors. [APPLICATION]: Can be widely…
Read more about this product
1 Review
20 Pack, 3/4-10, Coarse Thread, Zinc Plated Steel, Nylon Insert Lock Nut. Brand name: The Hillman Group. Model number: 180168. Item Weight: 0.76 lb.
1 Review
Diameter: 3/8". Material: Phosphate. Thread Type: 16 (Coarse). Style: Long U. Type: Spring Nut.
1 Review
Product Name : Nylon Lock Nut;Female Thread Dia(D ) : M10/9mm. Thickness (m) : 7mm/ 0.67";Width Across Flats (S) : 17mm/1.1". TotalThickness(h) : 10mm/0.4";Pitch : 1.5mm/0.06". Material : 304 Stainless Steel,Nylon;Color : Silver Tone. Net Weight : 52g;Package Content : 5x Nylon Lock Nuts.
1 Review
Internal Thread Size: M6; Nut External Diameter: 11mm/0.43"; Length: 10mm/0.39"; Applicable Drill Size: 8mm/0.31". Material: Zinc alloy material, color zinc finish, oxidation resistance, good toughness, corrosion resistance. Application: Suitable for connection and fastening of various objects, often used in furniture cabinets, wardrobes, and connecting…
Read more about this product
1 Review
💎Package Content: 10pcs x M10 Acorn Cap Nuts. 💎It offers protection of threads and a decorative appearance as a finishing fastener. 💎It is widely used to stairs,rails,expansion screws decoration etc. 💎Thread Dia.: 10mm/ 0.39"; Total Height: 18mm/ 0.7"; Color: Black. 💎Made of Nickel Plating Carbon Steel, Improve the Ability of Corrosion Resistance and…
Read more about this product
1 Review
ITEM TYPE: Hex Coupling Nut. THREAD SIZE - 3/8"-16. LENGTH - 1-3/4". WIDTH ACROSS THE FLATS - 9/16". MATERIAL - Low Carbon Steel, Zinc Clear.