๐ถ Network Transceivers
2 Review
10G SFP+ CABLE: This SFP + direct attach copper (DAC) cable 100% passed VNA and TDR tested. And each SFP DAC cable is individually tested before delivery for superior performance, quality, and reliability. Universal Compatibility: Our 10G SFP+ DAC cables provide a cost-effective, and low-power alternative to optical SFP+ systems. This 10gbe cable isโฆ
Read more about this product
2 Review
Product Type- SFP+. Interfaces/Ports Details- 1 x LC Duplex 10GBase-SR. Form Factor- Hot-swappable. up to 980 ft.
2 Review
The working voltage of the wireless module is generally 3.3v, and the ordinary 51 single-chip microcomputer is 5v. This module is convenient for use between the wireless module and the 51 single-chip system board. This module can be any one of 51 shop is directly connected to the system board, easy to use. This is a simple socket board which is forโฆ
Read more about this product
2 Review
SFP OPTICAL PORT: Gigabit Ethernet,1310nm/1550nm wavelength,Connect Singlemode bidirectional LC Fiber Cable,20km Transmission Distance,SFP fiber optical transceiver included. NETWORK PORT: 10/100/1000M, Full duplex-flow control, Half duplex-back pressure; Connect UTP CAT5 Cable,Supports MDI/MDI-X auto sensing. EASY to PLUG & PLAY: Support hotโฆ
Read more about this product
1 Review
โ ใ1000M SFP Fiber Portใ Including a 1000Base-LX Singlemode SFP Transceiver, link Singlemode Dual LC Fiber cable, 1310nm, up to 20km. โ ใ10/100/1000M RJ45 PortใProvide speed up to 1000Mbps stable Eternet connection, downward compatible with 10/100 Mbps, Supports Full Duplex or Half Duplex, Support MDI/MDI-X auto crossover. โ ใPlug and Playใ Just plug inโฆ
Read more about this product
1 Review
Compatibility - fit for Ubiquiti UF-MM-1G and other open switches, please contact us, any product quality and compatibility issues. Main Specs - 1000Mbps data rate, multi-mode, LC duplex connector, 850nm wavelength, up to 550m transmission distance, DDM support. Easy to use & Durable - Plug and play, hot-pluggable. Rotate the ring latch down at 90โฆ
Read more about this product
1 Review
Protect Your Home: Bulletproof Phone to Fiber fiber cable extender for long, prone to lightning, lengthy outdoor copper cables + Gigabit Ethernet connection will over SAME fiber along with 4 phones!. Universal for Both Fiber Types: Same media converter (extender) supports Multimode fiber for a distance up to 1 km (0.62 miles) and Single mode fiber for aโฆ
Read more about this product
1 Review
Extended Operating Temperature Range -40ยฐC to +85ยฐC (-40ยฐF to 104ยฐF) & DIN rail support. Durable & Reliable 3R OEO 10G Re-amplification, Re-shaping And Re-timing Device - Signal Repeater, Converter and Extender all in the same box!. Use it as a Single to Multimode Media Converter - 2 X standard open SFP+/SFP slots for any type of SFP+ modules. Use itโฆ
Read more about this product
1 Review
2รESP8266 ESP-01 Serial to Wi-Fi module ready for Arduino, NodeMCU, AT+Commands. Onboard GPIO, PWM, ADC, I2C and 1-Wire available. 3.3V input power. Connect your Arduino/BeagleBone/Raspberry Pi to Wi-Fi with ease.
1 Review
โ Tensilica L106 ultra-low power 32-bit micro MCU with support for 80 MHz and 160 MHz, RTOS support. โ10-bit high precision ADC. โTCP / IP stack. โ TR switch, balun, LNA, power amplifier and matching network. โ PLL, voltage regulator and power management components, +20 dBm output power in 802.11b mode.
1 Review
OSOYOO ESP8266 Wi-Fi Module is a high cost performance ratio Wi-Fi connection device designed for Arduino. It can make your Arduino devices connect to Wi-Fi Internet through Serial COM protocol in a convenient and cost effective way. 3.3V-5V Voltage Auto Converting -- Traditional ESP8266 chip must work in 3.3V voltage which might be damaged by Arduinoโฆ
Read more about this product
1 Review
Optical Port: 1.25Gbps, 1310nm/1550nm, Single-Mode Single SC Optic Fiber up to 80Km(49.7mile). RJ45 Port: Auto-detective 10M/100M/1000Mbps Cat5 Cable. Complies with IEEE IEEE 802.3/802.3u/802.3z/802.3ab. LED indicators for TX, FX LINK/ACT, POWER, FDX can dynamic feedback link connection state and fault detection to easily monitor network status. Compactโฆ
Read more about this product
1 Review
SFP is a hot-swappable input/output device. 100% compliant for all of our networking product lines. Loaded with OEM specific configuration data required for compliance. Perform identically to the OEM transceivers. Can be mixed and deployed with other OEM or 3rd party transceivers, for seamless network performance.
1 Review
1MB Flash Memory, upgraded from 512KB. Optimized circuit and wiring to improve WIFI radio performance. This module is more stable and it provides you stronger antenna signals. Integrated WEP, TKIP, AES, and WAPI engines.
1 Review
Compatible with Arista SFP-1G-T-PCW. SFP RJ45 Module fully compliant with the multi-sourcing agreement (MSA), which enables it to be installed into any networking device with an MSA compliant. Data Rate: 1.25Gb/s (could not be used as 10/100/1000M Multi-Rate SFP-T). RJ-45 Transceiver, 1.25Gb/s Copper SFP, 1000Base-T SFP, RJ45 SFP, with 3-year Warrantyโฆ
Read more about this product
1 Review
Compatible for Force10 CBL-QSFP-40GE-3M (Coding as Force10 GP-QSFP-40GE-1SR). Active Fiber Direct attach Cable 3 meters. QSFP+ AOC, 40G AOC, QSFP+ to QSFP+ AOC, QSFP+ Active Optical Cable. 100% Compatible with Force10. 10Gtek owns Compatibility LAB to meet the coding requirements for various brands of switches and routers. Each AOC Cable is individuallyโฆ
Read more about this product
1 Review
40GbE QSFP+ to 4xSFP+ DAC Direct Attach Copper Twinax Breakout Cable, Passive, 1-Meter(3.3ft), 30AWG. Widely compatible with Juniper QFX-QSFP-DACBO-1M Devices. 40G QSFP+ to 4xSFP+ Cable can connect 40 Gigabit switch, router, server, NIC, or other fiber optic equipments with QSFP+ ports to 10 Gigabit equipments with SFP+ port for Network Attached Storageโฆ
Read more about this product