📶 Network Transceivers
2 Review
This unique module opens up a whole world of high speed connectivity possibilities, offering up to 10 Gbps speeds over regular familiar twisted-pair cables in your existing products that have SFP+ ports. Any MikroTik device with active cooling that has SFP+ ports can now be used without installing any optical fiber, just plug the S+RJ10 and your network…
Read more about this product
2 Review
Must use with TFC-1000S10D3. SC-type dual-wavelength single-mode fiber port connects over distances of. 1000Base-T Gigabit copper port supports Full-Duplex mode. Supports port level SNMP management. Functions as a stand alone converter or with the TFC-1600 fiber chassis. Lifetime TRENDnet Manufacturer’s Warranty.
2 Review
INVAXON 100% Compatible for Cisco GLC-LH-SMD/ GLC-LH-SM/ SFP-GE-L. 1000Base-LX/LH, SFP transceiver module for SMF, 1310-nm wavelength. 1.25gb/s data rate ,distance can reach 10-20 km. We have our own factory with R&D room can meet all compatible CISCO transceivers.
2 Review
Compatible for Cisco GLC-BX-U and GLC-BX-D WDM SFP moudle. 1000BASE-BX-U and 1000BASE-BX-D Bidirectional SFP Optic, up to 20km over single LC. SFP Bidi Transceiver, 1.25Gb/s SFP Bidi, Single LC connector, Wavelength: Up: TX1310nm/RX1550nm; Down: TX1550nm/RX1310nm. Compatible with Cisco.Jeirdus owns Compatibility LAB to meet the coding requirements for…
Read more about this product
2 Review
Protect Your Home: Bulletproof Phone to Fiber fiber cable extender for long, prone to lightning, lengthy outdoor copper cables - Ethernet connection will over SAME fiber along with 2 phones!. Universal for Both Fiber Types: Same media converter (extender) supports Multimode fiber for a distance up to 1 km (0.62 miles) and Single mode fiber for a…
Read more about this product
2 Review
Compatible for Cisco QSFP-H40G-AOC3M. 40G QSFP direct-attach Active Optical Cable, 3 meters. QSFP+ AOC, 40G AOC, QSFP+ to QSFP+ AOC, QSFP+ Active Optical Cable. 100% Compatible with Cisco. 10Gtek owns Compatibility LAB to meet the coding requirements for various brands of switches and routers. Each AOC Cable is individually tested before delivery…
Read more about this product
2 Review
Lora1276F30 is a 500W high power wireless transceiver module. which integrates SemtechRF transceiver chip SX1276. It adopts LoRa TM Spread Spectrum modulation frequencyhopping technique. The features of long distance and high sensitivity (-139 dBm) make thismodule perform better than FSK and GFSK module. Multi-signal won't affect each othereven in crowd…
Read more about this product
2 Review
What You Get: 2pcs Gigabit Ethernet Media Converters; 2pcs Power Supply,1pcs Product Manual; 1-year Warranty, 30 Days Free-returned, Free Lifelong Technology Support. PLUG & PLAY: simply plug in optical port and UTP port, and it will work immediately, External power supply provided, support 9KB jumbo frame. Supports wide temperature range from 0°C to…
Read more about this product
2 Review
40GbE QSFP+ to QSFP+ DAC Direct Attach Copper Twinax Cable, Passive, 0.5-Meter(1.64ft), 30AWG. 40G QSFP+ Cable can connect switch, router, server, NIC, or other fiber optic equipment with QSFP+ ports for Network Attached Storage, Storage Area Network, and High Performance Computing. Widely compatible with Brocade 40G-QSFP-C-00501 Devices. In 10Gtek's…
Read more about this product
2 Review
1.25Gb/s, 1000Base-SX SFP, 850-nm, Dual LC Connectors, reach up to 550m(1804ft) transmission over OM3 multi-mode Fiber. Widely compatible with Ubiquiti UniFi, Mikrotik, Intel, Fortinet, Netgear, D-Link, Supermicro, TP-Link, Broadcom, Linksys and other open switches. Plug and Play, Hot Pluggable SFP MSA Compliant, IEEE Std 802.3ab Compliant, supports…
Read more about this product
2 Review
The TJA1051 is a high-speed CAN transceiver that is the interface between the CAN controller and the physical bus, providing differential transmission and reception functions for the CAN controller. The transceiver is designed for high speed CAN applications with transmission rates up to 1 Mbit/s. The TJA1051 is an upgraded version of the high-speed CAN…
Read more about this product
2 Review
HiLetgo 4pcs NRF24L01+ Wireless Transceiver Module. Multi-frequency: 125 frequency points. Low operating voltage : 1.9 ~ 3.6V low voltage operation.
2 Review
Converts RF signals to X10 commands. Built-in appliance module. Controls up to 16 X10 receivers. Sends status reports over the power line. Plugs into a standard power outlet.
2 Review
Optical Port: 1.25Gbps, 1310nm/1550nm, Single-Mode Single SC Optic Fiber up to 60Km(37mi). RJ45 Port: Auto-detective 10M/100M/1000Mbps Cat5 Cable. Complies with IEEE IEEE 802.3/802.3u/802.3z/802.3ab. LED indicators for TX, FX LINK/ACT, POWER, FDX can dynamic feedback link connection state and fault detection to easily monitor network status. Compact…
Read more about this product
2 Review
Hardened IP30 rated 100/1000 Base-T Ethernet to SFP converter. SFP port accommodates Multi or Single Mode fiber. Up to 80 km fiber networking distances with the TEG-MGBS80 SFP module. Includes DIN-rail and wall mounts. Extreme -40 to 75 °C (-40 to 167 °F) operating temperature range. Dual redundant power inputs with overload current protection. Powers…
Read more about this product
2 Review
Mikrotik CRS354-48G-4S+2Q+RM is a core level switch equipped with 48 RJ45 1 Gbps ports, 4 SFP+ 10 Gbps ports, 2 QSFP 40 Gbps ports and two power supplies. Provides 336 Gb/s throughput. Designed for mounting in a 19" rack. Specifications Mikrotik CRS354-48G-4S+2Q+RM{block-characteristics}
2 Review
Compatible for HP JD089B/JD495A/JD089A/JC009A Transceiver. HP X120/X124/X125/X126 1G SFP RJ45 Transceiver Support. RJ-45 Transceiver, 1.25Gb/s Copper SFP, 1000Base-T SFP, RJ45 SFP, 100-Meter. 100% Compatible with HP. Macroreer owns Compatibility LAB to meet the coding requirements for various brands of switches and routers. Each transceiver is…
Read more about this product
2 Review
Direct Attach SFP+ copper cable (10GSFP+Cu). SFP+ connector on both sides. Drives 10 Gigabit Ethernet (1 m distance). 5-year Warranty. Ordering part number: AXC761-10000S.