📶 Network Transceivers
4 Review
Compatible for Netgear AGM732F and other open equipments with 1G SFP port. 2-Pack. 1000Base-LX Gigabit Ethernet, 1.25 Gbps, 1310nm wavelength ,20km reach, Singlemode,Dual LC connector. Hot-Pluggable SFP Transceiver Module, PLUG and PLAY, with Advanced DDM Function to monitor real-time parameter and state on fiber links. 100% Each transceiver is…
Read more about this product4 Review
【Widely Compatible】Compatible for HPE ProCurve J4858C/J4858B/J4858A,QNAP, D-Link, TP-Link, Supermicro, Mikrotik, Broadcom, Linksys, ZyXEL, ZTE and Other open equipments. 2-Pack. 【1 Gigabit SFP LC Transceiver】Operating Data Rate up to 1.25Gbps, Duplex LC connector link multimode fiber patch cord, reach 550m, wavelength is 850-nm, MMF. 【Widely…
Read more about this product4 Review
★Implements CAN V2.0B at up to 1 Mb/s. ★SPI Interface up to 10 MHz;Ariduino/ Freaduino Completely compatible. ★Standard (11 bit) and extended (29 bit) data and remote frames. ★Industrial standard 9 pin sub-D connector; Size: 78mmx53.5m. ★Two receive buffers with prioritized message storage; Operating voltage: DC5-12V.
4 Review
Easiest way to program the fantastic ESP8266 ESP-01 module. Includes switch for setting Programming or Normal (Serial UART) mode. Built-in CH340 USB to Serial UART adapter and Micro-USB connector (Plug and Play). Built-in auto-reset for running application immediately after programming; 5V USB-TTL compatible.
4 Review
Compatibility - fit for Ubiquiti UF-RJ45-10G and other open switches, only support 10Gb/s, not support 100/1000M data rate, please contact us, any product quality and compatibility issues. 10GBase-T SFP+ module - 10Gb/s for CAT6A/CAT7 cable, copper RJ45 connector, up to 30m (support 1000Mbps rate for Cat 5e cable or better). Easy to use & Durable - Plug…
Read more about this product4 Review
🏆【NRF24L01+PA+LNA 】NRF24L01 is a single chip radio transceiver for the worldwide 2.4 - 2.5 GHz ISM band.add a high-power PA and LNA chips, RF switches, band-pass filters and other professional full bidirectional RF, making the effective communication distance has been greatly expanded.Compatible with Arduino. 🏆【Quality】On-board AMS1117-3.3 chip,with Auto…
Read more about this product3 Review
Voltage: 3.3-5V, Memory chips: AT24C32 (storage capacity 32K). About battery type: Battery is not included, you can use CR2032 or LIR2032 battery. Feature: The DS3231 is an RTC IC developed by Maxim Integrated. It is a low cost, extremely accurate RTC IC with communication over I2C Interface. An interesting feature of DS3231 RTC IC is that it has…
Read more about this product3 Review
Maximum coaxial transmission distance is up to 3900ft without POE or 984ft with POE. 2 port BNC design, support to connect Max. 7 channels branch line. Network max baud-rate is up to 100Mbps. Transmission Media: Coaxial Cable(Best), Twisted-pair. The EOC converter are widely used in CCTV surveillance, elevator and remote network extension.
3 Review
DAC Feature: 10Gb SFP+ to SFP+ Direct Attach Copper Twinax Cable, Passive, 5-meter, AWG24. Widely compatible for Cisco, Ubiquiti, D-link, Netgear, other Open Switch, etc devices. Wide Application: 10G SFP+ DAC Twinax Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area…
Read more about this product3 Review
DAC Feature: 10Gb SFP+ to SFP+ Direct Attach Copper Twinax Cable, Passive, 0.5-meter, AWG30. Widely compatible for Cisco, Ubiquiti, D-link, Netgear, Mikrotik, other Open Switch, etc devices. Notes: The SFP+ cable work as like SFP+ moudle will have cannot use in Encryption code Switch. This DAC cable cannot use in HP or Intel and other need special…
Read more about this product3 Review
DAC Feature: 10Gb SFP+ to SFP+ Direct Attach Copper Twinax Cable, Passive, 1-meter, AWG30. Widely compatible for Cisco, Ubiquiti, D-link, Netgear, Mikrotik, other Open Switch, etc devices. Wide Application: 10G SFP+ DAC Twinax Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage…
Read more about this product3 Review
DAC Feature: 10Gb SFP+ to SFP+ Direct Attach Copper Twinax Cable, Passive, 2-meter, AWG30. Widely compatible for Cisco, Ubiquiti, D-link, Netgear, other Open Switch, etc devices. Wide Application: 10G SFP+ DAC Twinax Cable can connect switch, router, server, NIC, or other fiber optic equipments with SFP+ ports for Network Attached Storage, Storage Area…
Read more about this product3 Review
FIBER INTERFACE: LC-type duplex connector compliant with IEEE 802.3z Gigabit Ethernet with a Low Electromagnetic Interference (EMI) design. FIBER MODE/ DISTANCE: The Multi-Mode Small Form-Factor Pluggable (SFP) transceiver spans distances up to 550 m (1804 ft.) and supports up to 1.25 Gbps. FIBER APPLICATIONS: Use this 1000Base-SX SFP module for long…
Read more about this product3 Review
S-31DLC20D is a 1.25G SFP transceiver with a 1310nm Dual LC connector. Up to 20 kilometer Single Mode fiber connections, with DDM. Connector: Dual LC UPC. Units are tested and compatible with RB260GS,RB2011LS, RB2011LS-IN, RB2011UAS-IN, RB2011UAS-RM, RB2011UAS-2HnD, RB2011UAS-2HnD-IN, and CCR1036-12G-4S. Units are compatible with non-MikroTik SFP…
Read more about this product3 Review
[ High Quality Material ] -- All 10g sfp+ transceiver modules adapt premium Zinc alloy material, anti-corrosion and salt spray resistance, durable enough for a long time use. Duplex LC fiber 10Gb SFP+ modules operate a data rate up to 10Gbps and 10km transmission distance!. [ Easy to Use ] -- 10GBase LR SFP+ module, a plug & play transceiver, just…
Read more about this product3 Review
USR-M511 is Modbus gateway that query Modbus RTU/ASCII slave and display data in internal webpage. Provides a Flexible Method to Control and Monitor your Modbus RTU/ASCII Device. Power Protection: Anti-reverse, ESD air 15KV Surge: 4KV (8 / 20us) Pulse group: 1.5KV 100KHZ. Supports Reply the Querying from Modbus TCP Master. Serial Port: RS232/RS485/RS422.
3 Review
Data Rate: 1.25 Gbps. Interface: RJ-45; Cable Type: CAT.5e. Reach: up to 100 meters transmission over CAT.5e. Wide Compatibility: nearly all major brand switches. Consult for volume pricing.
3 Review
1, QSFP+ DAC Twinax Cable, 30AWG 3m Length, 40Gb Networking Storage Server Cable;. 2, 40GbE QSFP+ Direct Attach Copper Cable, PVC Jacket, Zinc Alloy QSFP+ Connector Shell;. 3, Used in InfiniBand QDR, 40 Gigabit Ethernet, Fiber Channel, PCIe, Data Centers, High Performance Computing(HPC) & Storage;. 4, Comaptible with Arista Networking, Ubiquiti, D-Link…
Read more about this product3 Review
1, QSFP+ to QSFP+ DAC ethernet Networking Cable, 30AWG 2m Length;. 2, 40GbE QSFP+ Direct Attach Copper Cable, PVC Jacket, Zinc Alloy QSFP+ Connector Shell;. 3, Used in InfiniBand QDR, 40 Gigabit Ethernet, Fiber Channel, PCIe, Data Centers, High Performance Computing(HPC) & Storage;. 4, Comaptible with Cisco QSFP-H40G-CU1M, Ubiquiti, D-Link, Juniper…
Read more about this product