🔩 Power Tool Parts & Accessories
2 Review
Cutting Diameter 1/8", Shank Diameter 1/8", Cutting Length 1/2", Full Length 1-1/2". APPLICATION - Suitable for rough and finish milling in aluminum alloy. 3 FLUTES - Outstanding performance for better rigidity with well-balanced 3 flutes. Having a sharp cutting edge for high-speed cutting and have geometry for smooth chip flow. CORNER RADIUS - Used for…
Read more about this product
2 Review
Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Available in polished finish. Weldon shanks feature a round shank with one of more flats machined into the side for easy indexing and alignment. When run in a counterclockwise direction…
Read more about this product
2 Review
90Degree cutting angle;Screw down inserts;Radial rake angle: -10Degree;Axial rake angle: +7Degree. All types of square shoulder face milling, side milling and full slot milling (shaft end mills) of steels, alloyed steels, stainless and heat resistant steels, case irons and aluminum alloys. Fitted with 10Degree positive rectangular insert allow high…
Read more about this product
2 Review
TUNGSTEN CARBIDE: The PCB drill bit set is made from tungsten carbide steel with good milling, cutting performance, high efficiency. SHARP: These end mills have sharp cutting edges, can be use for milling holes, grooves and edges on plates. POLISHED SURFACE: Well polished surfaces are quite clean, neat, and there is no glitches or burrs on the shanksafe…
Read more about this product
2 Review
【QUALITY MATERIALS】Forged from titanium coated high speed steel.Make these step drill bits has high hardness. 【EFFICIENT OPERATION】In the drilling process, the step drill bits shakes less than the twist drill bits, and has a clear scale mark. 【MULTI PURPOSE】This set of step drill bits is suitable for drilling of thinner stainless steel, carbon steel…
Read more about this product
2 Review
Assorts Machine Tools comes up with another upgrade in the old designed taper turning attachments with option of LIVE REVOLVING CENTER now instead of old design's dead center option. Made from quality tool steel, this attachment makes the taper turning operation much easier than before and gives you the freedom of old school method of off setting the…
Read more about this product
2 Review
3/8" male national pipe thread. Maximum pressure of 300 pounds per square inch. Air flow of 99 standard cubic feet per minute. Maximum temperature of 250 degrees Fahrenheit. Made in USA
2 Review
Set includes 6 Non-Slips. Designed for the Bora Centipede work stands: CK4S, CK6S, CK9S, CK15S. Low profile solution for holding materials in place. Fits into P-Tops on top of each strut on Bora Centipede work stands. Fits in standard 3/4 in. bench dog holes.
2 Review
Unique saw fixings allow for fast and secure fitting of almost any chop saw. Bespoke table height setting with adjustable legs from 595 - 815mm. Left & right extendable work arms support workpieces up to 3m long! Even includes built in end stop. Telescopic & folding legs make this stand highly portable & easy to store.
2 Review
☛【MATERIALS】50 Pieces diamond burr is made of high-quality Diamond & Metal,more durable and wear resistant. ☛【DETAILS】Various shape and size meet your different carving need. 3mm shank fit most of rotary tool or bench grinder. ☛【MEDIUM GRIT】120 Grit size, suitable for medium carving, grinding,polishing on surface of materials, such as stone, jade,ceram…
Read more about this product
2 Review
Material: The rotary tool set is made of tungsten steel (hard alloy), high hardness, wear resistance. Great for processing Copper, Aluminum, Iron, Marble, Jade, Steel, Glass, etc. Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Please check the size before you buy it. High Efficiency: Processing efficiency is tens times higher…
Read more about this product
2 Review
Hitachi Power Tools has renamed to Metabo HPT. Same great tools, with only a new name. Hitachi power tool replacement part. For use on Hitachi power tool products. Hitachi 372757 DUST COLLECTOR SET C7UR/BUR C7SB3 Replacement Part.
2 Review
Diameter: 4 inch,100mm Arbor Size: 5/8 inch Thickness: XL Grit: 40 grit-4pcs 60 grit-2pcs 80 grit-2pcs 120 grit-2pcs Flat Type: 27# Use: Angle grinder Max Operating Speed: 80m/s Material: Aluminum Oxide Abrasive Zirconia. Industrial Grade Abrasive Material: Manufactured from long lasting Zirconia Aluminum Oxide Abrasive, , rigidity, safety and durability…
Read more about this product
2 Review
【Function】Allow you to use your PSA sanding discs on a hook&loop sanding backing pad,so you don't have to prepare a vinyl face backing pad specially for PSA sanding discs. 【Feature】The 10 mm thick soft sponge acts as a good buffer between the pad and discs, reducing the risk of edge sanding. 【High quality】Specially designed for PSA sanding discs, made…
Read more about this product
2 Review
Package 3pcs. Universal for dry or wet cutting. X teeth offer fast and smooth cutting. Thicker center to avoid vibrations and wobbling. High Performance diamond matrix provides long life and enhanced material removal. Super thin porcelain saw blade with free chips for cutting,Match with hand-held machine.
2 Review
【Size】 M14 Thread, Chamfer Angle:Top Angle 60 degree,Chamfer Diameter: 1 -1/2"(38mm),Total length: 45mm,Working Depth:38mm, Grit: #70/80.1pc Adapter M14 to 5/8" 11 thread . 【High Quality Diamond Material】This chamfer bit is made of premium diamond and durable metal.High hardness and strength. It uses these high quality raw materials to ensure more…
Read more about this product
2 Review
CONNECT: Rigid air piping to other devices (such as hose reels, air compressors, and more). 3’ EPDM Performance Hose: Stays flexible in cold conditions. Resists cracks, abrasions & chemicals. EASY INSTALLATION OR HIGH FLOW APPLICATION: with less system noise/vibration than hard connections. FITTINGS: 1/2" NPT male; 1/2" NPT female. Solid brass, corrosion…
Read more about this product
2 Review
Bi-metal type, 72" long, 1/2" wide, 0.025" thick, 6TPI. Perfect for cutting soft ferrous metal. 6TPI is fixed or constant teeth profiile, teeth are big. 6TPI is suitable for cutting solid bars. Suits all bandsaws which use 72" long, 1/2" wide bandsaw blade
2 Review
Bi-metal type, M42 grade, 111" long, 3/4" wide, 0.035" thick, 14TPI. Perfect for cutting soft ferrous metal. 14TPI is constant teeth profile, suitable for cutting tubing, profile, sheet etc. Teeth size: 3/4TPI>4/6TPI>5/8TPI>6/10TPI>8TPI>8/12TPI>10/14TPI>14TPI. Suits all bandsaws which use 111" long, 3/4" wide bandsaw blade