🔩 Power Transmission Products
3 Review
2 Rubber Seals. ID: 5/8". OD: 35mm. Width: 11mm.
3 Review
Deep-groove geometry for high speeds and supporting both radial and axial loads. Single-row bearing for supporting radial loads. "Light" bearing structure for use in limited space applications or for average loads. C3 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) to compensate for thermal…
Read more about this product
3 Review
SPECIFICATION: FR8-2RS Inner Diameter: 1/2", Outer Diameter: 1-1/8", Thickness=5/16", Flange Dia.: 1.224". ADVANTAGE: FR8-2RS bearings are shielded on BOTH SIDES to keep lubricant in. Shields on both sides of the bearing to keep dust out, and Preserve grease and prevent impurities from entering. MATERIAL: Made from Chromium Steel (GCr15) (not low carbon…
Read more about this product
3 Review
Package dimensions: 2.4 cms L x 5.8 cms W x 12.7 cms H. Package quantity: 1. Product type: Bearings And Bushings. Country of Origing: United States.
3 Review
Drawn cup needle roller bearing for applications with high dynamic loads. Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces. Full complement of rollers for higher radial load capacity than caged rollers. Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads. Meets…
Read more about this product
3 Review
Omron. G8P-1A4P 18VDC. General-Purpose-Relay. 30A 250VAC. Package of One Relay per Order.
3 Review
SIZE → Rubber Size:1.57''(Dia)x 1.18''(H);Thread Size:1.06"(Dia) x 0.39" ( H);Overall Height:2.24'';The nuts is M10 and universal in size and compatible with most device. STRONG QUALITY →Material: Metal+Rubber;Made of Durable Rubber (high durometer) and steel zinc coating,Simple geometrical design supports dynamic performance and stability under lateral…
Read more about this product
3 Review
Bearing I.D.: 8mmBearing Number: 608Bearing O.D.: 22mmBearing Thickness: 7mmID x OD x W (mm): 8x22x7.
3 Review
Single cone (inner ring) for connecting to compatible cups (outer rings, sold separately) to form a complete single tapered roller bearing. Supports both radial and axial loads between a rotating and non-rotating member. Operating temperatures range from -54 to 120 degrees C (-65 to 250 degrees F). Stamped steel cage evenly spaces rollers for reduced…
Read more about this product
3 Review
Drawn cup needle roller bearing for applications with high dynamic loads. Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces. Full complement of rollers for higher radial load capacity than caged rollers. Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads. Meets…
Read more about this product
3 Review
Class L shafting is designed for use with Super, Super Smart and XA Precision Ball Bushing Bearings. Available from stock and cut to length in most material types and options. Centerless ground for an industry leading cataloged surface finish of 8 Ra max. Roundness within 0.000080". Straight within 0.001" per foot cumulative when shipped from the factory…
Read more about this product
3 Review
High quality aluminum alloy material, sturdy enough and with fashion look, High performance motor ,Built-in high quality limit switch. Electric putter motor is a DC motor, when the power input line intermodulation, the electric putter output shaft moves at the opposite direction. No-load current; low-noise design. Quiet clean and energy efficient…
Read more about this product
3 Review
Deep groove geometry for high speeds. Single row for supporting radial loads. Steel cage evenly spaces balls for reduced friction, vibration and noise. Shields on both sides to keep lubricant in and contaminants out. CN (normal) radial internal clearance for applications that do not involve thermal expansion or atypical precision.
3 Review
Drawn cup needle roller bearing for applications with high dynamic loads. Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces. Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise. Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads…
Read more about this product
3 Review
Two-bolt housing with ball bearing insert for ready-to-mount installation. Setscrew locking collar for secure attachment to guided shaft. Between the inner bearing and outer fixing ring angle can fine tune. Easy to install
3 Review
Product: 6mm/0.23inch OD, 0.6mm/0.02inch Wire Diameter,35mm/1.38inch Total Height. Specificatios: 19.25mm/0.75inch Compressed Length,10N Load Capacity, 0.74 N/mm Spring Rate. ANTI RUST:Black oxide finish for extra protection against harmful rust and corrosion to ensure long time use. Feature: Spring ends are closed (squared), but not ground for…
Read more about this product
3 Review
Made in China. Package height :3.302 cm. Package length :72.39 cm. Package width :3.048 cm.
3 Review
Auto & Truck Maintenance. Country of manufacture: Canada. Manufacturer: GATES. Package dimension: 18.0"L x 18.0"W x 21.0"H.
3 Review
Size: (I.D. (Fw)= 8mm, O.D. (D)= 14mm, Width (C)= 12mm). ST14 steel drawn cup, GCr15 needle rollers one way clutch. Good heat tolerance, high load carrying capacity and stiffness. Low cross section, enable downsizing and suit for use in restricted mounting spaces. Pre-Lubricated. Good running properties.