🔩 Power Transmission Products
2 Review
【Package Include】- End Machined ballscrew SFU1605-500mm length with nut + BK12/BF12 end support with locknuts and circlips + 1605 Ball nut housing. 【Basic Description】- SFU1605 series end machined ball screw adopts rolling thread manufacturing process, C7 grade conversion and rolling screw, the accuracy can reach 0.05mm. Fine workmanship, overall…
Read more about this product
2 Review
The package length is 7.62 centimeters. Fit type: Vehicle Specific. The package height is 63.5 centimeters. The package width is 8.255 centimeters.
2 Review
Multi-Stage Velocity Sensitive Valving. Twin Tube Construction. 5/8 in. Diameter Hardened And Double Chrome Rod. Red Polyurethane Bushings. Includes Red Boot 15 Other Colors Available.
2 Review
Multi-Stage Velocity Sensitive Valving. Twin Tube Construction. 5/8 in. Diameter Hardened And Double Chrome Rod. Red Polyurethane Bushings. Includes Red Boot 15 Other Colors Available.
2 Review
【Size】Hole Diameter(Outer Diameter): 10mm/0.39"; Rod Diameter(Inner Diameter): 5mm/0.2";Free Length: 20mm/0.79"(±2mm). 【Load Type】Middle Load.Rectangular section, closed-end design. 【Material】Made of Spring steel material, the surface is red painted, not easy to rust, more durable. 【Compression Ratio】Compression Ratio of 1 million times: 0.25…
Read more about this product
2 Review
2 inch or 2-3/8 inch (50.8 mm or 60.3 mm) reserve tube (where required). Multi-lip fluid seal designed for smooth performance, long life and reduced friction. Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications. Country of Origin: UNITED STATES.
2 Review
Die Spring: compatible with most 3D Printer Bed, great for Creality CR-10 10S S4 Ender 3 Heatbed Springs Bottom Connect Leveling. Size: hole diameter (OD): 0.31"/ 8mm; rod diameter (ID): 0.16"/ 4mm; length: 0.78"/ 20mm. Rectangular Section: strong, keeps print bed level better when printing. Widely application: the heatbed springs are well applied for…
Read more about this product
2 Review
Input Voltage : 12V DC. Stroke Length : S = 200mm (8inch). Min Installation Dimension: L=S+175mm / Max Installation Dimension: A= 2S+175mm. Max Push Load : 6000N (1320lbs) / Max Pull Load : 4500N (990lbs). Control Mode : Positive & Negative.
2 Review
Type: Spiral Spring; Height: 18.2mm; Out diameter: 6.8mm. Made of high quality metal, durable and sturdy, long service life. Compression strength limit: 10 (N/S). Suitable for electronic communications, switches, hardware, batteries, fixtures, toys. Package includes: 60 x Compression Pressure Spring Coil.
2 Review
【Size】Hole Diameter(Outer Diameter): 8mm/0.31"; Rod Diameter(Inner Diameter): 4mm/0.16";Free Length: 20mm/0.79"(±2mm). 【Load Type】Light Load.Rectangular section, closed-end design. 【Material】Made of Spring steel material, the surface is blue painted, not easy to rust, more durable. 【Compression Ratio】Compression Ratio of 1 million times: 0.32…
Read more about this product
2 Review
Product Name : Ball Bearing;Material : Metal. Color : Silver Tone;Max Diameter : 11.6mm/0.46". Size : 10 x 4 x 4mm/0.39" x 0.16" x 0.16"(OD*ID*T). Net Weight : 8g. Package Content : 5 x Ball Bearings.
2 Review
Natural rubber (NR), vulcanized, 55 durometer (shore hardness +/-5°) mount body. Steel, zinc plated, blue passivated, molded in Tapped inserts/threaded studs: Steel, zinc plated, blue passivated, molded in Cover plate. Package Dimension : 7.62 centimeters L x 5.334 centimeters W x 1.27 centimeters H. Country of Origin: UNITED STATES.
2 Review
Package content: 2 sets of T8x8 brass anti-backlash nuts. Material: high-quality brass material, not easy to oxidize and corrosion-resistant. Specifications: Lead screw diameter: 8mm, pitch: 2mm, thread lead: 8mm; the center distance of two small M3 holes is 18mm. Features: Special anti-backlash nut, high precision, stable, quiet, low maintenance…
Read more about this product
2 Review
2 inch or 2-3/8 inch (50.8 mm or 60.3 mm) reserve tube (where required). Multi-lip fluid seal designed for smooth performance, long life and reduced friction. Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration - on most applications. Made in United States.
2 Review
Diameter: 12mm/0.472"; Lead/Pitch: 4mm/0.157"; Overall length: 400mm/15.748". Material: GCr15 steel; Accuracy grade: C7; Manufacturing process: rolled thread; Model: SFU1204-NUW. 【Advantages】High precision, low operating noise, smooth and durable, easy for installation and maintenance. Anti-backlash and can be used vertically. Long service life due to…
Read more about this product
2 Review
Precision Engineered for today's light trucks with G-Force technology for safety and performance; Gabriel Ultra provides comfort and control, long life, durability and maximum shock performance. Infinitely Variable Damping for all road conditions. Orifice Control Disc for consistent control comfort and stability and an OE-design single lip oil seal that…
Read more about this product
2 Review
Multi-Stage Velocity Sensitive Valving. Twin Tube Construction. 5/8 in. Diameter Hardened And Double Chrome Rod. Red Polyurethane Bushings. Includes Red Boot 15 Other Colors Available. Fit type: Vehicle Specific.
2 Review
UNIVERSAL DESIGN - 20 x 20mm (Dx H) rubber mount with M6 x 18mm Studs , set of 2 pieces rubber Vibration Mounts. EXCELLENT DESIGN - Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces. ADVANTAGE - The rubber has large elasticity and is light and high, which plays a good buffering role and can protect the…
Read more about this product
2 Review
These dampers are used for reducing stepper motor noise and vibration. These dampers are used for reducing stepper motor noise and vibration. Excellent anti-vibration dampers for quiet stepper motors. Suitable for CNC 3 Dimensional printer stepper motor. These dampers are effective to reduce shock. These energy- absorbing rubber mounts with a metal…
Read more about this product
2 Review
3/16" in diameter; Package includes 10 piece ball. Precision grade G100 balls. Made of 304 tainless steel with good resistance to corrosion. smooth surface precision balls. Good corrosion resistance is important, but hardness is not.