πͺ Router Bits
1 Review
Diameter (D): 1-5/8. Radius (R): 1/4. Cutting height (B): 11/16. Shank (D): 1/2. Overall length (L): 3-1/8.
1 Review
Shank Diameter: 6mm / 0.24"; Cutting Diameter: 5mm / 0.17"; Number of Flutes: 2. Cutting Length: 13mm / 0.51"; Overall Length: 57mm / 2.24". Suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc. Material: HSS-AL, sharp and durable, bendingβ¦
Read more about this product
1 Review
Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety ofβ¦
Read more about this product
1 Review
Manufacturer SKAD Manufacturer code 1861208 Model Stiletto Section Rims Country of origin Domestic Type Lit Mounting diameter 18 Rim width Number of holes PCD Bore circle diameter 112 Offset 40 Hub diameter 57 Color Selenium
1 Review
UP&DOWN Solid Carbide spiral router bit with 1/8inch shank and 1/8inch cutting diameter, 3/4 inch cutting length, 1-1/2 inch total length. The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados, Plunge cut leave with clean edgeβ¦
Read more about this product
1 Review
The 2 Flute Spiral Flush Trim bits With Up Cut. 1/4" Shank Diameter and 1-3/8" Cutting Length and 3" Overall Length. For use with soft & hard woods, ply-woods, composites, laminates, plastics and some non-ferrous metals. Premium solid carbide with 60HRC. Industrial Quality Router Bits.
1 Review
C3 micro-grain tungsten carbide blades, high-quality alloy steel bodies with anti-kickback design. 6 different sizes slot cutter router bit set - with 1/2 inch shank, the cutting depth is 1/2", 6 sizes cutting thick: 1/16", 3/32", 1/8", 5/32", 3/16", 1/4". High precision grinding technology - help you make a clean, smooth and flawless woodwork,Heatβ¦
Read more about this product
1 Review
(D) diameter: 3/8. (B) Cutting height: 1-1/4. (D) shank: 3/8. Overall length (L): 3. B1: 9mm. 1 Amana Branded Tool.
1 Review
1/4 inch shank flute and bead router bit set. Cut wood board at varied angles, joint them to get arc-shaped woodwork, like hot tub. Made of hard alloy, high quality and long service life. Heat resistant Teflon coating to prevent building-up of sawdust, resin, and pitch. Suitable for cutting composition materials, plywoods, hardwoods and softwoods.
1 Review
γDescriptionγThe tool setting instrument is a special tool setting instrument for the engraving machine machining center machine. The output signal of the tool setting instrument is received by the numerical control system and then the tool length setting, tool wear detection and tool breakage are detected by the program control. In the case of noβ¦
Read more about this product
1 Review
Shank: 1/4". Ball Size: 1/8", 3/16" and 1/4". Cut Length: 3/4".
1 Review
ROUTER BIT SETS: 3PCS 1/2" shank raised panel router bit set is used to create rail and stile cabinet door frames at a depth of 3/8" in stock up to 1", great Bits for the home woodworker & perfect choice of professionals and hobbyists. PREMIUM C3 CARBIDE BLADES: The milling cutter set has good edge strength and toughness, strong vibration resistanceβ¦
Read more about this product
1 Review
Size - 1/8" Cutting edge diameter:1/8" (3.175mm).Flute length: 17mm. Overall length: 38.5mm. Material - Solid carbide. High cutting efficiency - Spiral groove design, smooth cutting, chip removal without obstruction. Applicable equipment - Fits for woodworking engraving machine,CNC. Scope of application - Suitable for wood, plywood, fiberboard, plasticβ¦
Read more about this product
1 Review
Using for hand-making a door or other woodworking. This 2 bits Ogee entry door Router bits set can cut rails and stiles between 25mm and 45mm thick. Industrial Quality Router Bits. Create rail and stile entry door frames with extended tenons. Create strong and beautiful entry doors with an additional bit for extended tenons.
1 Review
1/4 inch shank router bits with radius sizes: 1/8", 5/32", 3/16", 1/4". Add a round over edge to a variety of surface edges and projects or create small moldings to be used on its own or as part of a molding build-up. Designed for the hand-held and table-mounted router, it can not be used in electric drill & drill machines. Great for combinedβ¦
Read more about this product
1 Review
This round over router bit has a 7/16" radius and 7/16" cutting depth. The shank is 1/2" in diameter. Add a round over edge to a variety of surface edges and projects or create small moldings to be used on its own or as part of a molding build-up. Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge. For use on table mountβ¦
Read more about this product
1 Review
Shank Size: 1/2-Inch, Cutting Diameter: 2-1/4-Inch, Cutting Length: 1-7/8-Inch. Solid Hardened Steel Bodies with anti-kickback design. Carbide-Tipped blade with high-grade welding, stable quality high efficiency. Magical Multi-Form Router Bit: It can be adjust cutting height to molding up to 40 differfent combination form for what you need. Classicβ¦
Read more about this product
1 Review
Bit is used to flush face frame to cabinet side while at same time cutting a v-groove down cabinet joint. Bit can also be used to create a decorative v-groove cut. Micrograin carbide tips provide superior wear resistance and long life. Compact ball-bearing pilot guides bit along edge of material.
1 Review
2555. Flush Trim Three Flute Double Bearing Bits. Industrial Quality.