🛠️ Scanners & Testers
3 Review
Removable magnetic display can be conveniently mounted where it is easily seen. Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument. Battery life: 400 hours. True-rms AC voltage and current for accurate measurements on non-linear signals. Low power wireless technology allows the display…
Read more about this product3 Review
Mutipurpose Use: Accurately measures AC/DC Voltage, DC Current, Resistance, Circuit Continuity, Diode and Batteries (1.5, 9, 12V Battery Settings), transistor HFE, Low Battery Voltage Indication and full overload protection, etc. A very useful test tool for solving industrial and household electrical issues. EASY TO USE : 2.7" Large Backlit LCD Display…
Read more about this product3 Review
Safe Electricity Measurement Pen---This unit is a non-contact AC voltage detector for detecting 12V-1000V AC voltage.Meets CE requirements CAT II 1000V/ CAT IV 600V. Intelligent Live&Null Wire Judgment--- Judgment.The LED light will be red or yellow, red means high voltage and live wire are detected, yellow means low voltage and null wire are detected…
Read more about this product3 Review
Parameter information: power supply: 3.0V - 5.5V; Adjustable resolution: 9 - 12 bit; Temperature range: -55 °C to +125 °C; Output : red (VCC), yellow (DATA), black (GND). What you get: you will get 4 DS18B20 temperature sensors, 4 adapter modules and 4 female to female jumper wires; The adapter module has a pull-up resistor, which can be directly…
Read more about this product3 Review
Temperature measuring range:-50 to 110°C (-58 to 230 °F); Resolution: 0.1°C at -9.9 to99.9, and 1°C at other temperature intervals;refresh rate: 0.5 s. Opening size: 45mm*25mm/1.76"*1 ";Dual color LED display:Temperature controller monitoring instrument, show the measured temperature (red) and set temperature (blue) at the same time.which can be applied…
Read more about this product3 Review
The AHT10, a new generation of temperature and humidity sensors, sets a new standard in size and intelligence: it is embedded in a dual-row flat leadless SMD package for reflow soldering with a 4 x 5mm bottom and a height of 1.6mm. The sensor outputs a calibrated digital signal in standard I 2C format. The AHT10 is equipped with a newly designed…
Read more about this product3 Review
Just One Case !. Soft interior to ensure Electronics and accessories protected. Hand Strap For keeping your devices safe and handy,Lightweight. Packed inclued: One Case. Classic zipper convenience for easy in Opening and Closing. Backed by 100% Money back Guarantee, this is totally risk-free buy; CLICK the Orange button to Order Now!.
3 Review
⚡[Wide Range Avometer] True-RMS AC/ DC amps multitester can accurately measures DC volts 0.1mV~1000V; AC voltages 1mV~750V; DC & AC ampere 100mA~1000A; Resistance 0.1~60MΩ; Capacitor 1pF~60mF; Frequency 0.001~9.999MHz; Temp -4~1832°F (°C/°F Optional), diode and continuity test. ⚡[Bluetooth Amps Meter] Download wireless App for Android/ IOS phones on…
Read more about this product3 Review
Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators, Support the identification of QC2.0, QC3.0, PD, SAMSUNG quick charge protocol;. It adopts 0.96 inch IPS high-definition color liquid crystal display, which can be connected in two directions, 160 degree wide viewing angle, high brightness and long…
Read more about this product3 Review
【Multi-Function TV Signal Meter】RY S110 CATV Cable TV Handle Signal Level Meter is an instrument used for the construction and maintenance of analog TV / digital TV, and the measurement of TV signal level and power level. It is widely applied in the routine maintenance of the CATV system; slope measurement,voltage measurement,measurement of C/N ratio…
Read more about this product3 Review
3.94/6.89 Feet Portable Stand Tripod - Only stand that works with eZthings mounted thermometers. Multi Function Stand Holder Portable and Lightweight. Reduce patient contact in a Medical Facilities. Suitable for a temporary set up solution for schools, retail stores, workplace entry lobby, hotels, and many other businesses. Made of high-quality aluminum…
Read more about this product3 Review
【Parameter】- Test Voltage: 12-220V; Display Mode: LED light + Display; Test Head Type: Flat head; Special Function: Continuity Test. 【Quality Material】- This DC voltage tester is made of high quality plastic, insulating, sturdy and durable. 【Two Usage】- Voltage tester screwdriver pen has two kinds of applications,one for measuring circuit electrical…
Read more about this product3 Review
Mini Visual Fault Locator Fiber Optic Pen Cable Fault Locator. A mini body, small and light, easy to carry, even take it in your pocket. Wavelength: 650nm; Not include batteries and fiber jumper. Connecter: general 2.5mm connecter(SC/FC/ST/LC). Working Temperature: -10 to +45; Dimensions: 118*33.6*19.2mm.
3 Review
Performs all standard automotive electrical tests on the car or bench troubleshooting. Measure and set typical automotive functions with the tach and dwell setting. Test electrical components for faulty wiring and voltage. Check starting, charging and fuel delivery system voltage, and diode function. Extra-large easy-to-read digital LCD. UL listed leads…
Read more about this product3 Review
【Easy Placement】The mini round shape thermometer has strong magnet, sucker and inchcock on its back which provide you with great convenience for placement. 【Wide Usage Range】This model of digital thermometer which measures from 0°Cto 50°Cwhich can be used in Room, Gardening,pet keeping etc . 【Max/Min Temperature Memory Function】This model of digital…
Read more about this product3 Review
Versatile tool tests both RJ45-CAT5/6 and Coax cables. Ruggedized for field use with no breakable LCD screen. PASS/FAIL results appear in one second and each pair's status is highlighted. Performs a complete TIA568 test: continuity, opens/shorts, reversals and split pairs. Auto-off (12 seconds) and low battery indicator help maximize your battery life.
3 Review
Voltage up too 600V AC/DC, AC/DC current and resistance, frequency. Capacitance for checking startup capacitors, temperature and microamps for flame sensors. Non-contact voltage detection and audible continuity. Diode test and duty cycle for troubleshooting applications. Backlit LCD display with data hold, MIN/MAX and relative zero mode.
3 Review
【3 IN 1 FIBER HOLDER】- SM, MM, bare fiber, pigtail, rubber-insulated, multi fiber cable. Applicable Fibers:SM(G.652&G.657);MM(G.651);DS(G.657);NZDS(G.655). Splice Loss: 0.025dB (SM), 0.01dB(MM) 0.04dB (DS/NZDS). Coating Diameter:100-1000μm, Cladding Diameter:80-150μm. 【5” TFT DISPLAY】- It adopts 5-inch 800X480 high-resolution screen, and the operation…
Read more about this product3 Review
Constant & stable output power. Operates either in or Pulsed. Pocket size andweight, easy to use. Finding the breakpoint , poor connections, bending or cracking in fiber optic cables.
3 Review
Long lasting .040 inch thick hydrogel - superior conformability to body contours. High re-wettability/dry out resistance - effective in high heat and humidity, highly conductive carbon film - even current distribution. Spun lace top coat: flexible & conformable to a variety of application sites, soft molded socket connector, provides superior connection…
Read more about this product