Review on 🖨️ Premium Canon ADF Hinge FL4-2051-000 FL3-1430-000 | Compatible with D1350, D1150, D1120 and More: MF419dw, 1435i, C250iF, C350iF by Katie Miller

Canon Laser Printer Hinges This is an exact replacement for the WEAK link in Canon laser printers, the platen cover hinges. My printer is D1320 but they also fit D1170, D1180, D1370, D1520, D1550, MF419dw, 1435i, C250iF, 1435iF and C350iF. interruption. Installation instructions are not included with this part, so let's get started. Lift the entire roller cover straight up, pull out the remaining loop (if any), turn this cover backwards and place it upside down on the roller, being careful not to stretch the wiring harness.2. Remove any broken hinge parts from the hinge receiving holes (square) on the back/top of the printer.3. Using a #2 Phillips screwdriver, remove all four hinge screws. Set the screws aside, such as in the staple slot on the printer.4. Place the hinge on the roller cover and hook the rear notch of the hinge over the strap receiving area of the printer so the hinge lays flat.5. Screw on this hinge, being careful NOT to over-tighten the screws. 6. Attach another hinge with the two remaining screws.7. Turn the roll cover right side up, carefully guide the square blocks of the two hinges down into the appropriate holes and lower the cover into place. That's all. Remember never to raise the roller cover more than 60 degrees.