Review on Enhance Your Bathroom Organization with Questech 8 Inch 🚿 Corner Shower Shelf - Matte Sand Geo Flatback Wall Mounted Organizer by April Russell

Pretty easy installation. Prep: Scrape the tile with a flat razor, then wipe with isopropyl alcohol and a microfiber cloth. Mark the outline of the shelf with a pencil. Sand this area lightly to improve adhesion of the adhesive to the tile. Then wipe again with alcohol. And maybe a beer. Installation: I used Devon Gel 5min Epoxy which has enough glue for 3 shelves. The supplied adhesive pads were only used in the back corner to attach the shelf to the wall. I 3D printed 9 blocks of 1 x 1.5 inch and applied foam tape to each block. These blocks will support the tile while the epoxy cures. Inspect the shelf and use a pencil to mark on the shelf where more or less epoxy needs to be applied. .Dry assemble the shelf (no glue!) and support it with blocks to be glued to the wall. Now we are ready for the epoxy. A few hours. Finish: Apply 100% silicone sealant to match joints. Only 100% use silicone, no siliconized sealer as it remains soft and moldy when wet. That's it!