Review on 💅 Marble UV LED Nail Lamp: Professional 54W Nail Dryer for Gel Polish with Auto Sensor and 4 Timers - Portable & Ethereal Nail Arts Tool by Rebecca Inman

I have a few small UV lamps for gel nail extensions but there are many more out there . more expensive than this one. This is for the manicure only. There are 27 UV beads in this marble lamp. When I tested it, all functions worked as expected. In summer I enjoy a good pedicure. My nails train in the garden and I wouldn't use gel paints. This is a good lamp for home use. I have a lot of gel polishes and this lamp is perfect for the job. Below I have listed my favorite recipe for using a UV lamp with gel polishes. APPLICATION: 1) Properly prepare nails and cuticles. If you don't do this, the bonder and polish won't hold up well. 2) Apply a layer of Ez Flow TruGel Bond-It-On and let it dry completely. You can do all your nails and thumbs at this point. 3) Apply the base coat to four fingers (you do the thumbs separately). Make sure you do the nail tips. 4) Cure all four fingers in your manicure lamp for 1 minute (I value my time here). 5) Repeat the process on the other side. 6) You should do your thumbs separately to make sure they cure properly. 7) Apply base coat to thumbs. Make sure you paint over the tips of your nails. 8) Put both thumbs under the nail lamp for one minute. Flatten them for best results. 9) Apply the chosen gel nail polish to your nails. These color gels are designed to be used in a nail lamp. 10) Cure all four fingers in a manicure lamp for 90 seconds. Apply the gel polish of your choice to the miniature nails. Make sure you brush over the edges of your nail tips. 14) Place both thumbs under the manicure lamp for 90 seconds. Flatten them for best results. 15) Apply a second coat by repeating the process. 16) Apply a coat of top coat by repeating the same process including curing under a UV lamp. Rated power: 24V DC USB cable Dimensions: 7.16 x 8.85 x 3.34 inches, 215mm x 133mm x 75mm.