Review on 🔥 BACOENG Vacuum Chamber Heat Pad: Enhanced Thermal Efficiency for Precision Applications by Shawn Jimenez

First, it is very convenient to use. It also heats up quickly - 160F in 5 minutes. The guide is clear and easy to understand how to set up the default data in the controller. And second, most heating pads come with glue to stick them under the vacuum chamber, but this one allows you to attach them directly to the chamber. Make sure you are using the right size camera. I have a 3 gallon and a 5 gallon vacuum chamber. The heating efficiency was not relatively good when using the Bacoeng 9" vacuum heater for the 5 gallon vacuum chamber. Also, be extremely careful about the temperature shift. Read more in the guide. Let me give an example. If you use the Set the chamber temp to 120F with the controller, the chamber temp inside the surface is about 111F, so now all you have to do is add 9F (offset 9F) to the controller, ie change the controller readout from 120F to 129F, with that you can get 120F inside the camera. The heating power increases rapidly. The heating material consists of etched metal foil/wire wrapped around a 1.5mm thick heater. And I also noticed silicone and rubber insulation. By the way, pay attention to the pads not to touch with hands.At the time of purchasing this heater I was the first to review it so I wanted to make sure I had all the necessary punk te achieve. It works great for me. You can try the Bacoeng vacuum warmer.