Review on 1M USB Motherboard Cable Extension - Duttek USB Header 10 💻 Pin Male to Female Header Extender with Dupont Jumper Wires for Better Connectivity by Sean Santhanam

Firstly if you are using this for USB it has 10 pins instead of 9 so you will need to remove one of the male side pins before using it assuming you have a female side with it a solid corner (like most). Second, it consists of two bundles of wires, each with five wires. One goes to the top layer of five pins, the second goes to the bottom layer of pins. The particular cable that arrived for me was made with them in reverse order. Namely, the upper layer of the male side moves to the lower layer of the female side and vice versa. So I had to completely disassemble the outlet, disconnect all ten wires, and then reassemble properly. I don't know how this could have happened as I thought it was done on automated equipment. However, mine wouldn't work at all when it arrived. After swapping the cable both ways (swapping wires top to bottom and removing one wire) it worked fine, which is why I'm giving it two stars. If I had known I was going to have this problem I would have just bought individual jumper wires and wired them up myself. Live and learn - I wouldn't buy this again or recommend it to others.