Review on 📶 Enhanced 300Mbps Wireless Outdoor CPE Kit - Point-to-Point WiFi Access - 2.4G WiFi Bridge with 1KM Transmission Range - PTP/PTMP Compatible (Pre-Programmed) by Nathan Kumar

I was looking for a way to connect to the internet in our steel pole building without running wires. That's when I discovered this wireless bridge. I tested it indoors before plugging it in outside and it worked very well. The next step was to connect everything from the outside. When ordering a bridge, be sure to specify the length of the Ethernet cable. The cables included in the kit (2) are approximately 3 feet long. I've used 100ft and 25ft in the post office and a few 15ft around the house. I used RCA antenna wall mounts with 1 1/2 PVC plastic tubing. I used the included zip ties to attach the jumpers to the pipe. A 100 foot ethernet cable runs to the back of the building where my business is located and I plugged it into a spare router. Setting up the router required an Ethernet-connected computer, so I used a Raspberry Pi to set it up. I surfed the web and downloaded videos with no problems. Setup was easy: plug and play. Simply install the jumpers, align them and route the cables. At first I was very impressed with this product, I hope it will be a long term solution and that it stays waterproof and works in the freezing temperatures of winter. ***Update*** I wanted to update this review. to let others know that I have been using this product for over a year with no problems.