Review on 📺 No-Stud Low-Profile Tilting TV Wall Mount for 32-80 inch TVs up to 200 lbs - Amazon Basics by Kimberly Polcher

Seems like an easy install. 2 things to remember. 1 Remember to attach the back to the TV first to measure the difference from the center. 2 Don't forget to measure the center 4 of the bracket on the wall. Unfortunately I tried putting it all the way to the left and realizing that after I screwed in the first screw I had to move it seven and a quarter inches from the edge where I wanted it. And after reading the comments I learned to make sure my part that attaches to the TV was centered and if not then adjust the dimensions accordingly. The spirit level on it doesn't seem to be entirely accurate. I downloaded one from my phone from the google play store, there are actually two of them. And like on the plane. Googling shows that the center of the TV should be 56 inches off the floor for a 42 inch TV. So after finding the center of your TV, you need to calculate the difference if it is inches or minus inches to attach it to your TV. . For me I had to add 5 inches. Seems pretty solid after using 2 studs which I pulled down and it didn't budge. And thankfully, they don't include the screws or washers needed to keep the screws from going through the mount. For the price and ease of installation I would recommend this product. BTW I think since I'm mounted in a bedroom and beds can be high off the floor I might have had to install it a few inches higher. In the future, they will contain recommended mounting positions depending on the type of room, distance, etc.