Review on 💧 RainBro CSW050: Efficient 1/2 HP Cast Iron Shallow Well Jet Pump for Wells up to 25 ft by Jeremy Meza

Good replacement for savings $ Standard Switched to 240 volts Has a small switch for 120 volts or 240 volts This was a great replacement with pipes in all the right places. Had to set the switch to 120v as it is set to 240v there should have been a big RED sticker on it. It's also set to turn on at 40psi and turn off when it hits 60psi with a bladder tank you set to 38 without water if you can get that. My pump only went up to 35 lbs. You generate this pressure via the tire pump through the Schrader valve at the top. THEN FILL THE PUMP through the small brass fill hole at the top of the pump. THEN turn it on and watch all your valves. Other pumps of the same rating with the same capacity cost twice this minimum cost. looks very good with cooling fins on motor housing and fan. Make sure your fountain house has good shelter to keep the rain from falling on the motor.