Review on MOR Ryde TV1021H Double Swivel by Noel Pilla

The Morryde TV1 021H is very well made and sturdy with plenty of hardware to fit any TV. I considered a heavier version but it didn't make much sense given that my 43" TV weighed 15 pounds and the mount was rated at 35 pounds. I needed a strong mount that snaps into place as it was to replace the original front anchored 25" CRT TV that was in my Winnebago RV. I designed and built the frame and some cross pieces to put the TV1 021H in the right place. This was the critical part as it had to be accurate otherwise the screen would be at the wrong angle or position. I also wanted it to be mounted so that when the TV is slid all the way back and bumps against the original wooden frame it will lock into place. This should eliminate almost all rattling noises and vibrations. I did not use the supplied self tapping screws to mount the unit, I drilled six 3/8" holes and used 3/8" screws with nylock nuts. durable, without unwanted movements. I am very happy with the end result. I highly recommend MorRyde products. Pictures for your enjoyment!