Review on 💡 Modern Matte Black Ralbay LED Vanity Lights | Acrylic Bathroom Lighting Fixtures by Joseph Stone

The light is amazing in every way except installation. I'm an electrical engineer and had it when companies were moving away from industrial wiring stands. The ballast was attached with double sided tape and only touched a very slightly raised outer edge of the hull, failing as soon as it was tipped over in preparation for installation. It is 120 volts AC to variable DC output and when the ballast came loose it tore loose butt connections and then had to be re-soldered again. Another issue is that a black and white AC wiring scheme was used instead of the standard red and black DC wiring. This would make ballast repair or replacement very difficult for anyone. Still, Light is Bight and works fantastic. I have included wiring for others to fix if needed. The input to the ballast has a black/white 120V AC input which is US standard and black is hot and white is common, the output has black/red wiring and is connected to a chain of wires, all of which are black/black. White. The red wire goes to the black circuit and the black wire goes to the white wires. Hope this helps anyone who had the same problems as me.