Review on 🚦 Enhance Safety: RUXIFEY Sequential Switchback Mirror Reflector LED Turn Signal Compatible with 2009-2014 Ford F150 - Smoked Lens by Tommy Willis

Installed on the 2013 Ford F-150. First take your time to remove the mirror, insert the flat head between the tabs and twist starting from the bottom, the top tab should just pop off, there is a youtube video on this. I didn't remove the doorknob either, just put a stool or something similar on which the door panel could sit after removing it. To power the white light I used fuse number 40 which is responsible for the front position lights. Then the white light will turn on along with the parking lights. I also bought rear facing LEDs from them so they can be easily connected to the front. The driver's side didn't have enough wire to get to the passenger side to hook it up to power, I had 22 gauge wire to extend it. The wire on the driver's side was cut in two when the molding was slid into place. The wire is small and the metal behind the molding is sharp. And don't turn around when looking at the front LEDs, the dot engraving on mine was upside down but the light works great. Your instructions are rubbish so study them while you wait for delivery. I also bought a puddle light (not pictured) maybe it's all separate now. I connected the puddle lamp power supply to the side terminal of the cab (purple wire with no stripe) and grounded to the transom stud. I spent 4 hours on it but I'm happy with the result. Update 7/4/21: Right mirror front signal lost almost half of the LEDs, looks so bad now I had no choice but to remove both sides. There were no failures on the driver's side, but there was no choice. Will not buy them again because of all the installation work and will take them back in a year.