Review on 📺 Adjustable Full Motion TV Wall Mount - JUSTSTONE TV Bracket for 27-65 Inch LED Flat & Curved TVs - Swivel, Tilt, and Height Settings - Dual Arms Extension - VESA 400x400mm - Holds up to 121 LBS by Maurice Jimenez

So, first of all, "Be Careful”. This item will only fit 18" wide rivets at max size and size is 400x400. So as long as it's strong enough to fit a HUGE and HEAVY TV. My old heavyweight had a 600x400 drawing. I got it from a roll of tape made a wrong pattern to hang the air duct. But the 18" limit combined with the template hack meant the setup wasn't exactly where I wanted it. While my TV is close to the upper weight limit, and the range of motion and angle adjustment is still good with it being that large. My big problem is the mechanism you use to hang this TV. It only has 2 very small and very shallow protrusion slots. And as the whole thing is 400mm wide, stand They don't side by side. So they barely stick out to snap in and you should be perfectly centered. So you're holding the heavy butt of a 50-70" TV and trying to blindly aim for two points Aim less than half an inch from the target. And what happens is you just hook into one of the sides of the mount and lower it, the whole thing rotates so the opposite rail is an inch or two higher. it's all over You have to flip it. And when you're near the ceiling, the tilt places the corner of the TV in the ceiling. ating, and it took us several attempts to reset everything, reset the mount to true, and try again. Once it's on. smooth sailing. With a lightweight TV, it would probably be a no-brainer. But if like me you found this because it was the cheapest, highest quality and heaviest swivel mount on Revain. Just know that you need to align it with the studs and that you should achieve a perfect fit (10 points from the Russian judge) when mounting the TV to the bracket itself.