Review on 🔧 TOPPDR TOOL Paintless Dent Repair Kit: Complete Car Dent Removal and Hail Damage Repair Solution with Dent Lifter, Glue Gun, and Glue Sticks by Patrick Stowers

We have built handicapped accessible raised beds that people in wheelchairs can use. They turned out beautifully, but of course there's always one or the other who just didn't bring himself up properly. All three beds are covered with decorative corrugated cardboard. To avoid sharp edges, the metal is hidden behind a tree and has no access to them. Yes, we should have anticipated the vandals, but we didn't. We tried fixing it with suction cups and magnets but the metal was too strong for any solution. .When this tool appeared, I doubted it could work the way it does. First I sanded the surface with masking tape (later it turned out that this was not necessary). We then used the hot glue from the kit and liberally applied it to the pad and quickly glued where we thought it would work best i.e. the bottom of the pad. H. The highest points of the corrugated iron. The tool can be adjusted with the handle to lower to the shoulder of the tongue. After the glue was cool to the touch, without expecting too much, we pulled the levers and it popped out with very little effort. We made about 20 spots before running out of glue, but we have all the basics and can easily go back to finish. .The set comes in 10 different sizes and they have all withstood the abuse we have given them. However, they offer metal for $12, so I just ordered them. I see many uses for this tool and the metal tools should last a very long time. The kit comes with a scraper, but it is made of plastic and is not suitable for our needs. I ended up resting my knife on the tip of the glue gun until it got hot and that took the burrs off the metal and as I cut the glue flew out like... well, like a hot knife. :) The glue gun is great, but I had to use an inverter car battery. Now I have a cordless glue gun. I made fun of the people who bought them, but no more. Bottom line: when you repair dents on cars (at least on modern cars), this works better than I ever imagined. If you're like us and don't need electricity, get a cordless hot glue gun. I also think that you shouldn't skimp on the glue. It's what makes this whole system work, so a quality glue is well worth it. The company ones are just a stick. That's enough for about 10 idiots. Not bad. We as a team are very happy with this product. Highly recommended. I (we) hope you find this review helpful.