Review on Laser level Condtrol Omniliner G3D (1-2-153) (2020) by Adam Nowak ᠌
I am very happy with this purchase, I will advise everyone!
When calling the office the store said that there may be different batches of Condtrol Omniliner G3D (1-2-153) (2022). Including without a remote control with a smartphone through the application. At the office There is no such information on the website, so it is not clear if this is true. At the moment, they have a photo showing the case and the remote control, and the remote control is not listed on the Ya. level. On the Y. market it is indicated that the level can work from the network, this is incorrect information. But with two alternately used batteries, the absence of this function is not critical. I would like the package to have small devices for attaching the level, such as a magnetic holder or a swivel stand. I bought a tripod Kontrol H150, very convenient, but not suitable for all cases. I purchased this level for non-professional use, for control and work during the repair and arrangement of an apartment, for use in the country, given the declared range. For a long time I thought about the advisability of buying this multifunctional level for infrequent use, but the craving for reasonable (or unreasonable) maximalism and a good tool still won. When the tool is pleasant to use, and this level is exactly the case, then sometimes pleasant emotions are more important than even practical benefits. It feels like the level is soundly knocked down, the body does not creak, does not play, it is tactilely pleasant. The price-quality-function ratio suited me (14,300 with delivery). When buying, I recommend taking the time to check the accuracy of the work. The verification algorithm is described in detail in the instructions, I downloaded it on the website and studied it so as not to delay the courier for too long. It took me about 20 minutes to check the level and tripod. The price of not checking may be a trip to the warranty workshop with a new level and with the probability of proving that you did not drop it. It is better not to accept immediately if there is a discrepancy.
- 3 d is convenient, no need to turn the level around. The rays are quite clear, the attached photos and videos were taken on a sunny day, although there is no sun in the room, it is well lit. The line on the curtain is visible even against the background of a lighted window. In the photo with a beam thickness of 1 mm, the level is at a distance of 0.5 m, with a beam thickness of 2 mm, the level is at a distance of 6 m. When buying, I tested it, the error of my copy along the horizon is 1 mm per 10 m. This is the easiest and most accurate test. I tested the vertical error very conditionally, it is possible to determine it in an apartment with ceilings of 2.50 only with a strong deviation from the norm, but at least for this case a test in an apartment is needed. For accurate verification, you need a height of at least 5-10 m. To check the correspondence of right angles between the beams, you need a lot of free space, it is convenient to measure 3m x 4m, then the diagonal will be 5m, I measured this parameter at shorter lengths after purchase, there are no gross deviations , and more precisely in apartment conditions it is difficult to measure. The remote control is convenient, it works in the apartment without a retractable antenna, obviously the antenna will come in handy at a long distance. The pendulum, if you swing as much as possible, calms down in 4 seconds. Nice, fabric-lined semi-rigid case. When one battery is in the level, there is enough space in the case to put another device in it, I put the rangefinder in the case (140x65x35).
- Sufficiently large distance of the horizontal beam from the floor - 128 mm. When working below this height, additional manipulations become necessary. There is no bubble level on the level, but you can align the level with the upper emitter, focusing visually on its approximately middle position in the window on both sides, turning off the beam if it blinds. Although the case leaves a pleasant impression, nevertheless it would be more suitable, for example, for a surveyor or a photographer. In the conditions of construction, in my opinion, for any device sensitive to shocks, the case should be very hard and easily cleaned from construction dust, for example, from impact-resistant plastic on the outside. A trifle, but also when carrying the cord and the remote are guaranteed to leave their sockets and walk around the case (they do not sit tightly enough in the recesses).
