Review on Quiet Full Tower Computer Window BGW15 by Bai Dang Thi ᠌

Bought this case for a nice expensive water cooled build. Before taking it under dropsy, you must first decide what the size of the radiator and pump will be. I bought an Alphacool Eissturm Hurricane 45 3x140 cooler for later expansion of the CBO system. After several assembly options and fittings, the Chinese screws were licked. the heatsink was installed only on the front panel, since the thickness of the heatsink with coolers is 70mm, and even if you move it to the bottom of the entire system by two PCI E slots, as the developers intended, access to the mat. fees. leaves much to be desired. The casing in the kit, which decoratively closes the PSU and cables at the bottom of the case, can be thrown away if you do not modify it for installing a pump with a drill and a grinder. Ideally, the case is designed for radiators no thicker than 30mm. It is not clear why in the expensive and top-end case of 2022 a basket for 2 pieces 5.25 was made, idiocy (thrown it out right away, it got in the way a lot). All baskets for installation for HDD are also useless when installing a radiator of this size, it simply covers them, not a single one can be installed! The mounts for the normal longitudinal shift of coolers in the amount of 140mm have not been finalized, if further developed, then again with a drill and a grinder. The plastic isn't the best either. I took it for 16300r at the beginning of July 2022. When I almost finished the assembly, I came across the Phanteks Eclipse 600 case (not advertising) and was very upset. The case is much better and the price is much more interesting.