Header banner
Revain logoHome Page
Micha Kobiaka ᠌ photo
1 Level
342 Review
0 Karma

Review on Radar detector Inspector Spirit by Micha Kobiaka ᠌

Revainrating 5 out of 5

The quality is at the highest level, be sure to try it.

I used to use a DVR with a speedcam base, but unfortunately its support is gone, the camera bases have not been ated for 5 years. Plus, there was an excellent functionality for displaying the current speed. But the years go by, and the producers leave. When choosing a new registrar, instead, they advised me to look at the given radar detector, Inspector Spirit. It is he who has the output of the current speed on his entire screen while driving, if everything is fine, there are no cameras and we do not violate it. If a camera is detected and the speed threshold is exceeded, the radar switches to the main mode and gives full information. I have been using since June 2022. I liked the radar itself, very interesting, functional, I got everything I wanted. the only thing I would like to add is the scotch mount to hang higher, the suction cup often falls off and does not rest on the perforation. I bought such a mount on Ali, fixed it on silk-screen printing, it became generally compact and takes better, as it has become higher located. And in general, you need to hang as high as possible, then it catches all the cameras per kilometer. Catches everything, including tripods, with a minimum of false positives. There is truth sometimes on passing cars with trigger sensors. The RD has a lot of settings and it’s not easy to figure them out by the way. The explanations in the instructions are rather poor and the meaning is also not very clear. It is not very clear whether you need to enable this function or not, which of the proposed settings to choose. There are several adjustments for brightness, volume and duration of the alert, easy to customize. Several times I went to the point where I took it, the consultants helped. It is inconvenient, of course, that in order to ate it you have to carry it home or bring a computer to it. Well, once every couple of months you can.) Good luck to manufacturers and us users good technical support. 02.22. I bought a mount from Aliexpress for it, it became much more compact. I hung it on silkscreen, where the suction cup does not hold. It is better to glue on an adhesive tape on an antistatic film, so that later it can be re-glued without problems. It has been working for more than a year, the camera bases are being ated, the firmware has been ated.

Pros
  • Pharm factor, the possibility of various settings, the accuracy of operation.
Cons
  • Fastening to him on the adhesive tape from the kit! I bought this on Ali, fixed it on silk-screen printing, it became generally compact and takes better, as it has become higher located.