Review on 🔵 Enhance Your Off-Road Adventure with the LAMPHUS 12V 40A LED Light Bar Relay Wiring Harness Kit for ATV - BLUE Mini ON/OFF Switch by Derrek Fields

Perfect harness; so cheap that I can't replicate it with workshop parts. I had a hard time choosing the wire harness and switch combo - and I will be buying them again! I used this to complete the installation of a 20" Nilight [ASIN: B00WE47FVM 20" 126 watt LED headlight, combo fog lamp and LED light bar. SUV Light Boat 4x4 Jeep Lamp, 2 Year Warranty]] in my Honda Element. First some specs - the kit includes an under hood wiring harness consisting of a relay and fuse connected to the wiring harness assembly. The relay and fuse are connected with a 12" wire so they mount close together. The main power relay is about 14 inches long; So you install a relay/fuse installation near the battery or an underhood mounting point. The negative wire to the relay is short and can be attached to the relay mounting screw/stud (not included). There are a couple of wires that need to be used from the relay to the lamps, they are about 7 feet long and the same length. This is the wiring harness under the hood. To connect the relay to the included switch, you have a white wire (8 feet) coming from the relay. The switch has a separate power cable (5'). The switch also has a separate ground wire (2'); This is only used to ground the switch LED (you can't connect it and the system will work otherwise). The quality of the material is good. All components are supplied by PRC. The switch suits most applications and feels unique when reaching for it at night. If you're looking to upgrade something, upgrading the relay seems like the logical choice. Even with a Bosch relay I went with the supplied relay. ALL components worked and appeared to be of a quality that would last for years. The kit also includes an extra insulated socket in case you cut something; then change your mind! The only parts I provided were; Heat shrink tubing (to connect the wire harness to the lights), butt connectors (used for the wire harness with the lights and used to route wires through the firewall grommet), zip ties (used to bundle excess wire and secure the light wire harness attach when it went to the lights.