Review on LED Cornhole Lights: Remote Control Edge and Ring LED Lights - 16 Color Change - Perfect Addition for Nighttime Bean Bag Toss Cornhole Games at the Family Backyard - 2 Sets by James Brault

Good quality but a few oddities with the battery case require you to be flexible. The "button" to open the case is too big so there's no real hope of opening the case if you screw it flush like it should. I cut it off with a Dremel cutting wheel (it melted as it cut) and filed the edge with a thin file. Also, there is only one screw tab for the battery compartment. ? Mm, at least two are required. I hope one lasts. Don't have many stylish solutions other than PERMANENT glue. Finally, in my opinion, they don't give you enough screws and clamps. This is because the lightweight ring is flexible, not rigid. So you need a lot (I used 8) around the perimeter so he doesn't block the hole. There are fewer than the 14 I found necessary to put the lights around the perimeter. I had to add 5 of my own to get a total of 44 which I think is the minimum (yes I had 39th an odd number). In the top left corner of the scoreboard I drilled a hole to allow light to pass between the inside and outside of the scoreboard. Ring and battery compartment on the inside, surrounding lighting on the outside.