Review on Enhanced PoE Tester Detector: Advanced In-line Voltage & Current Analyzer GEN2 by Sean Bouchard

Pair of PoE network switches and PoE intermediate injectors I've had very mixed results. The two 60w intermediate injectors I tested with worked great. It turned on immediately without having to turn on the "PoE Device Simulation" switch. The Cisco switch I tested it on did not turn on or pass power until I turned on the Simulate PoE device switch. After turning it on, I was able to turn the switch back off and it continued to work. Another mid-span PoE injector I have (90W x 2), the Gen2 PoE Tester will not turn on or pass power at all, both with and without the Simulate PoE Device switch on. I emailed their support team but got an immediate response that they are closed until January 4th. I will provide an updated review as soon as I get a response from them. Update December 31st: I got a reply from the seller and his PoE tester only supports Type 3 to 802.3bt and does not support Type 4. Since my PoE injector is Type 4, it cannot simulate a Type 4 device and get it to turn on. Also, it cannot signal for Type 4 devices.