Review on 🔆 GETINLIGHT Dimmable LED Puck Lights Kit - Recessed/Surface Mount, Soft White 3000K, 12V, 2W (6W Total), ETL Listed - Pack of 3 by Jennifer Davis

I'm a professional electrician and that's what I think. Halogen, and the 2 watt LED is a great replacement for the 20 watt halogen. These products are exactly the same size as the ones I removed so the hole fits perfectly. Factory connectors on all wires and a jumper to connect them. No connections may be made with wire nuts, pliers or similar. The transformer plugs into the outlet, which in my case was just above the cabinet. This is a set of 3 but I only had two washers cut in the closet. So I decided to put the third one on top of the cabinet and face up. I think it was a very good effect. Now the back. This kit comes with a dimmer module between the transformer and the bridge. This dimming feature is great. Works very smoothly. However, there is a wall switch that turns this outlet on and off. When this wall switch is cycled off and back on, the dimmer module defaults to the off position. In other words, every time I turn the wall switch off and on again, I have to climb stairs to turn the light back on. on the dimming module. So in my scenario the dimming module was useless. A mains transformer will not work with a wall dimmer so they are on full brightness all the time. This is fine in this setup, but some people will probably want the dimming function to be easily accessible. I suppose if you want a wall dimmer you can get a dimming transformer and install it easily. Attitude, this will have a 5 star rating from me.