Review on 🌬️ TYC 00-13 Sb Frstr Blower Assembly: High-performance and Reliable Unit for Optimal Air Circulation by Corby Muin

A good replacement for the original fan motor at a lower price. The quality is comparable and the fan works like the original. I had to replace the connector on the wiring harness in the car itself on the original engine with heavier gauge lugs and thicker wire and I recommend doing the same when replacing. Very happy with this product. UPDATE 12-03-2018 I've had this motor for about a year now. I live in southern Arizona so the air conditioner never turns off during our summer months. After reading other reviews I was concerned about noise issues as the fan ages. I can say that after a year of intensive use, the fan is still as quiet as the original Subaru heater motor. Based on other reviews I don't know if this was an isolated production issue but in our case it worked great. In response to a question about a connector for this fan. and the wiring is very underestimated. What I did was extend the wires with heavier gauge wire, just like the 110 mounts. I used shrink tubing at the connection point. I then used regular terminal lugs that can be found at any hardware or electronics store to replace the factory plug. The only problem you'll run into is making sure you have the correct polarity on the wires, as the original connector makes it physically impossible to reverse polarity. The once good thing about using large terminal lugs was that they also act as heat sinks, pulling heat away from the connector as it draws a lot of current. Obviously more current than the original plug and wiring could handle. I took a picture of the tips used but I don't see an option to upload a picture at the moment. I'll see if I can upload it to a review or something.