Review on 🔴 Introducing LivTee's Brilliant Red Strobe Blinking Brake Lights Panel with 1157 Base for Harley Davidson Dyna Street Glide Road King - Enhance Safety and Style! by Jeffery Pricinoc

Easy install on my 2020 Road Glide Limited after a small issue with base pin alignment. No problem with LivTee front indicators. The outlets on my 2020 have two sets of slots in the outlet for the lights. The light socket is suitable for both. One shot straight and the bulb goes to full depth but doesn't lock into place. Slightly clockwise from these slots are the actual slots for the offset locking pins. It took me two or three tries before I realized that there were two different sets of slots. Using the base of the light I rotated the LED board and pushed the board into the housing so the wires curled up and lay flat in the turn signal housing. I have the lens and everything. I noticed it was a little loose, but both lay flat. I can go back and use double sided tape if the LED board moves into the plastic lens. Otherwise easy to install and works as advertised. The halo illuminates as a DRL, goes out and flashes amber when the turn signals or hazard warning lights illuminate. My Harley came with tinted lenses and I compared the factory bulb to the LEDs and the LEDs are VERY bright. The turn signals do not flash but the turn signals on the headlights flash faster. I love her!