Review on 🔆 SEALIGHT 9006/HB4 LED Bulbs 14000LM 6000K Xenon White - 400% Brighter Fog Lights, Non-polarity (Pack of 2) by Terry Wilson

Installed light and much brighter than standard halogen. The Kia Niro 2020 is accessible through a plastic door in the front wheel arch. To install: 1. Turn the front wheel so that it is screwed into the wheel housing as far as possible2. Open the wheel arch cover by gently pulling the black plastic tab in the middle3. The access panel (approximately 4" x 8") falls from top to bottom. Don't pull too hard or you will break the bottom rivets) 4. You must first disconnect the wires from the lamp as there is a small retaining pin that prevents it from rotating5. Turn the bulb counterclockwise 1/4 turn and pull the bulb out of the socket6. Insert the LED connector at approximately the 3 o'clock position, making sure it is fully seated, then rotate the housing 1/4 turn clockwise7. Connect the wires to LED8. Reinstall the plate 9. Reattach the retaining latch to secure the plate10. Repeat the above steps for the other side