Review on 🚽 YUHX Brass Bidet T Adapter with Shut-Off Valve: 3 Way 7/8 or 15/16 and 1/2 or 3/8 - Premium Metal T Valve for Bidet Tee Connector Water Diverter Valve by Carlos Burrows

I bought the YHUX bidet T-adapter because it had a shut-off that allows you to turn off the water supply to the bidet (in case of a problem/leak) while still allowing water to flow into the toilet. The YHUX brass bidet tee adapter is quite heavy, has a beautiful chrome finish and comes with a 1/2" to 3/8" adapter which allows it to work with numerous bidet products . It feels well done. Most pucks are included. I speak the most because if you look at the second feedline picture I've attached, it comes with a cone washer. This is not the case with the YHUX valve. So be careful when disconnecting the supply line from the toilet fill valve to avoid damaging the cone washer as it is required for the connection on the underside of the YHUX. and you can buy another one separately to use instead of the washer provided by YHUX. I personally find the cone washer less prone to leaks. My toilet has a Fluidmaster 400 toilet fill valve and no matter how hard I tried I couldn't screw the YHUX tightly onto the fill valve. I had a new replacement Fluidmaster v and was trying to connect YHUX to it. Fits perfectly. So of course I swapped out the valve that was already installed in the toilet for a new valve that was seven years old and may still be dying. I did not use Teflon tape when connecting YHUX to Fluidmaster. but I used teflon tape to connect the water line to the YHUX to connect the 1/2" to 3/8" adapter and the 3/8" line to the bidet I chose. no leaks. Finally, and this is just a FYI, look at the picture of the YHUX connected to the toilet valve but before the bidet supply line has been connected. You'll notice that the non-return valve is on the back so the bidet supply line connector faces the front. You can hardly see it. But it turns easily and does its job perfectly. Would I buy this product again and recommend it. Absolutely yes.