Bought for use in the Gameboy Zero project. I got "option 7" in the sudomod wiki. I removed the voltage regulator IC by snipping off the legs with pliers and soldering a small wire between the voltage input pad and the regulator's output pin 2 on the board because I wanted to supply it with 5V directly. Some manuals suggest this isn't necessary, but I noticed that leaving the regulator on caused the input voltage to drop from 5V to 4.7V and the screen to flicker. Works great, good clear picture with no flicker. It works fine without the input button board connected. So if you don't have space for it, don't worry about leaving it. I removed the control board and was hoping to move it around, but the ribbon cable is very finicky, if it's not bent and angled properly you will get weird colors and flickering on the screen so I'd suggest leaving it connected . how it is.
70mai dash cam midrive D01, black
53 Review
DVR 70mai Dash Cam Pro Plus Rear Cam Set A500S-1, 2 cameras, GPS, GLONASS, black
44 Review
70mai dash cam pro plus rear cam set A500S-1, 2 cameras, GLONASS, black
49 Review
Upgrade Your Car'S Safety With CHORTAU'S 2023 Dash Cam - 1080P FHD, 170Β° Wide Angle, Night Vision, And More
44 Review
π§ Alpha Pilot Headset Flight Bag (Black) β Streamlined Flyer Solution
8 Review
βοΈ Enhance Your Aviation Experience with the David Clark H10-13.4 Aviation Headset
9 Review
πΊοΈ CARRVAS GPS Navigation System for Car, 2021 MAP 7inch Truck GPS Navigation, Spoken Turn-by-Turn Directions, Speed Warning, USA, Canada, Mexico, Lifetime Maps Update
9 Review
π©οΈ Stratux ADS-B Dual Band Receiver: Advanced Aviation Weather and Traffic System with WAAS GPS, AHRS, Battery Pack, Suction Mount, Antennas, SDR
9 Review