Review on 🔑 Lexus ES GS GX IS LS LX RX SC IS300 IS330 GX470 GX300 RX300 Key Fob Cover - Enhanced Replacement Keyless Entry Remote Key Shell by Victor Kakaruk

I would give a solid rating of 5/5 but the installation is really painful**. The reason is that the black piece everyone is talking about is difficult to assemble. Somehow I managed to adjust it flawlessly and she did. First cut off the top of the key with a Dremel or sandpaper so it looks straighter on top (I have a Lexus GS400 key) or as a solid line across the key. As a mechanical engineering student, I promise that the wrench's structural rigidity will not drop significantly where it engages. It's just a cut. Then look into the top of the rosette, take your sandpaper and sand down the two sides of the keyhole to create a larger hole at the top. I'm talking about taking an existing funnel hole and making it bigger. I used a dremel with a round disc and widened the gap at the top. This allowed the remaining 1mm of the key to sit flush. After that you are done and you can just install the key properly. Finally, if the glue got stuck in an existing metal wrench screw hole, take a paper clip and stick it through the hole, or use a pointed object and tap it lightly. It works well and is very durable. This plastic is very high quality, it took me a long time to file it as it is a hard plastic compound. I would highly recommend this wrench, but be aware that this is not the type of thing that can be cut and glued. This is a project.