Review on 18W Dimmable Flush Mount LED Ceiling Light with Remote Control, Modern Surface Mount Flat Ceiling Lamp for Closet, Bathroom, Entryway, Kitchen - Timing Function, 3 Color Temperatures in One (3000k/4000k/6000k) by Kesha Walker

The light comes with an LED driver that can be separated from the light itself. This is both a blessing and a problem as vertical space for an LED driver is very limited. If you put it in a box, it's better to put the driver in a box. The bracket that comes with the flashlight is really flimsy and the holes don't fit the US box. Therefore, expect to drill the bracket. Not repairable, but annoying. Your "ground wire" is connected to the mount by a screw and it's not like it has no contact with the mount as it is screwed on top of the paint so you will need to remove the ground wire and scrape the paint off. and fasten. If you like me, ie drill the bracket and your box will be grounded, scrape off the paint next to the drilled hole. OK. so the mount is in place. Did I mention it's FLIMSY? he bends at the touch. So be prepared to use a whole lot of carefully chosen swear words as you try to tighten the screws that hold the flashlight to the mount for quite a while. After that, the light becomes bright, but with a significant switch-on delay. If the fluorescent lamp has been replaced, the delay will be shorter. If you have worked with more modern and high-quality LED lamps, then you understand that the lag is too much. But for money. This is further proof that you get almost what you paid for.