Header banner
Revain logoHome Page
Omar Obong photo
Macao, Baltimore
1 Level
714 Review
63 Karma

Review on πŸ› οΈ Harley TCMT Docking Hardware Kit | Fit FLHC, FLHCS, FLSB, FXBB (2018-2022) | Replaces 52300645 & 52300646 by Omar Obong

Revainrating 5 out of 5

Perfect neat solution for my 2021 FLHC (Heritage Classic) with a little tweaking.

This standard vertical back sissy bar works well on the FLHC/S Heritage Classic with standard saddlebags. Here are my experiences and things to watch out for.1. Remove saddlebags. The pocket screws have a black gasket held in place by a small black O-ring. Gently pull or twist the black gasket to expose the o-ring. Once you see it, use your fingers to roll it all the way off the screw. 2. Replace the standard black standoffs with the matching standoffs provided. Install the left/front complete silver docking gasket and the right/rear black docking gasket. Make sure the left and right docking pads are evenly aligned. not mine. The left spacer sat a little farther than the right. I used the washer that came with it to align them. 3: Don't forget to "roll" the O-rings back onto the screws. Reinstall saddlebags.4. Now to the Sissi bar. I was unable to place the sissy bar on the docking bolts with the passenger seat on the bike. First remove the passenger seat.5. I then aligned the sissy bar with the docking spacers, but the sissy bar brackets were too narrow. With my hands I was able to "smear" the sissy bar over the docking spacers by working from one side and then the other. It wasn't that hard to do.6. Now that the sissy bar is resting on the docking posts, BE SURE to "snap” the sissy bar onto the front and then the rear docking post spacers. You should hear/feel the bar snap into place.7. passenger seat. You cannot reinstall the passenger seat in the usual way (by routing the front side first). Move the passenger seat to the side (face the fender), THEN rotate and place the seat on the seat brackets at the front of the bike. It's easy when you do it for the first time.8. Install the sissy bar onto the hanger and you are done. The fit is clean and secure. I could have made the installation more difficult than it needed to be. It really isn't. I'm just trying to point out a few things you may come across. Enjoy. Drive safe.

Pros
  • Excellent Overall Performance
Cons
  • Doubtful