Review on 🚗 EP27 Flasher Motor Vehicle Novita by Warrick Batebi

My daily driver is an 04 Mustang with over 200,000 miles so I've had to replace quite a few working parts over the last few years. My turn signals started acting weird a while ago, sometimes they flashed, most of the time they just stayed constant, sometimes they started flashing and then just stayed on so I had to manually toggle the switch on and off to keep people on inform I was just about to dodge. I read this thread and realized that it could be the flasher module under the dash, but I didn't get my hopes up because it seemed too simple and it's very rare that a solution can be that simple. . I tried it anyway and got lucky – it was so easy! Install this flasher relay and bam! Works, flashing turn signals! The only difficulty for me was removing the old factory flasher relay. Being under the wheel makes access a bit awkward, and the connector in my car got stuck, it just wouldn't disconnect from the original relay. I finally managed to unplug it but I couldn't get the original relay out of the clip so I just plugged this relay in and used some zip ties to keep it nice and tight so it didn't fall out and I used velcro with an adhesive base used to hold the relay in place - right next to the old one - to keep it from rattling. So far it has worked great! FYI, my car installed an optional third LED brake light and that wasn't a problem, this relay works great. This solved my problem and solved it for less than $10 and with very little effort, which is more than I was hoping for. I'm so happy